Xerox 3100MFPX User Guide - Phaser 3100 MFP/X - Page 25
Print cartridge installation - x toner cartridge
UPC - 095205741964
View all Xerox 3100MFPX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2 - Installation 2 Push the lower panel down until it clicks. Phaser 3100MFP/X Print cartridge installation 1 Stand in front of the machine. 2 Grasp the left and right sides of the cover and pull it towards you at the same time. 3 Setup the back side tray stop by pushing the "PUSH" level (A). Then adjust the side paper guides to the paper size by pushing lever (B) located on the left side guide. Adjust the length paper guide to the paper size by pushing lever (C). 3 Unpack the new print cartridge. Gently roll the cartridge 5 or 6 times to distribute the toner evenly inside the cartridge. Thoroughly rolling the cartridge will assure the maximum copies per cartridge. Hold it by its handle. 4 Insert the cartridge in its slot by pushing it until it clicks, then gently push the handle down (as shown below). 4 Take a paper stack, pull the paper off and align it on a flat surface. 5 Put the paper stack in the tray (200 sheets of 80 g/ m² paper for instance). 6 Slide the tray back in its location. 5 Close the cover. - 20 -