Yamaha MOTIF7 Owner's Manual - Page 132
General, Other, F2] Normal Common, Output, Arpeggio, Arpeggio type, The basic parameters e.g., type
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Reference Voice mode Voice Edit mode time Sets the Time parameter range to reflect "time": 0 (fast) - 127 (slow) ● [F1]-[SF5] Normal Common General Other From this display you can set the control functions for the Knobs, and determine the up/down range for the Pitch Bend wheel. • Knob Assign Determines the function for the assignable Knobs (1-4). Pressing the [KNOB CONTROL FUNCTION] button on the panel sets the desired function row, which is automatically stored to memory with the currently selected voice. ❏ Settings Pan & Send Tone PAN REVERB KNOB CONTROL FUNCTION CUTOFF RESONANCE ASSIGN A ASSIGN B CHORUS ATTACK ASSIGN 1 TEMPO RELEASE ASSIGN 2 KN 1 KN 2 KN 3 KN 4 MEQ LOW MEQLOWMID MEQ HI MID MEQ HIGH MeqGain Assign • ChoCtrl Determines the depth of the Chorus effect, as controlled by the Knob assigned to Chorus Send. ❏ Settings -64 ~ 63 • PBUpper, PBLower These two parameters determine the pitch change range of the Pitch Bend wheel. ❏ Settings -48 ~ 24 • Assign A, Assign B, Assign 1, Assign 2 This lets you directly set and memorize the value for each Assign Knob (A, B, 1, and 2), from the Knob itself. Simply tweak the knob to the desired setting. ● [F2] Normal Common Output • Volume Determines the output level of the Voice. ❏ Settings 0 ~ 127 • Pan Determines the stereo pan position of the Voice. You can also adjust this parameter using the PAN knob on the front panel. ❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right) • RevSend Determines the Send level of the signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Reverb effect. You can also adjust this parameter using the REVERB knob on the front panel. ❏ Settings 0 ~ 127 • ChoSend Determines the Send level of the signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Chorus effect. You can also adjust this parameter using the [CHORUS] knob on the front panel of the MOTIF. ❏ Settings 0 ~ 127 ● [F3]-[SF1] Normal Common Arpeggio Arpeggio type Basic Structure (page 55) The basic parameters (e.g., type, tempo) of the Arpeggio are provided in this display. When user arpeggio is selected, you can clear the selected arpeggio data by using the [SF5] button. This apppears only when user arpeggio is selected and cursor is located at Type. • Bank Determines the Bank. ❏ Settings pre1, pre2, user • Type Determines the Arpeggio type. The two-letter prefix before the name indicates the general Arpeggio category. • Tempo Determines the Arpeggio Tempo. When MIDI sync (page 258) is turned on, "MIDI" is displayed here and cannot be set. ❏ Settings 1 ~ 300 • Switch Determines whether Arpeggio is on or off. You can also turn Arpeggio on/off from the front panel with the [ARPEGGIO ON/OFF] button. ❏ Settings off, on 132 MOTIF Reference