Yamaha MOTIF7 Owner's Manual - Page 136

Voice Edit mode ● [F5]-[SF2] Normal Common LFO Delay From this display you can set various delay and fade-in/-out parameters, and give the LFO a more natural sound. • FadeOutTime Determines the amount of time for the LFO effect to fade out (after the Delay time has elapsed). A higher value results in a slower fade-out. ❏ Settings 0 ~ 127 Hold Max Low FadeOut value Faster fade-out FadeOut Time • DelayTime Determines the delay time before the LFO comes into effect. A higher value results in a longer delay time. ❏ Settings 0 ~ 127 Short delay Long delay Key on Key on • FadeInTime Determines the amount of time for the LFO effect to fade in (after the Delay time has elapsed). A higher value results in a slower fade-in. ❏ Settings 0 ~ 127 Max Low FadeIn value Faster fade-in FadeIn Time Delay Key on Max High FadeIn value Slower fade-in FadeIn Time Delay Key on • HoldTime Determines the length of time during which the LFO is held at its maximum level. A higher value results in a longer Hold time. ❏ Settings 0 ~ 127 Hold Max Time Hold Max High FadeOut value FadeOut Time ● [F5]-[SF3], [SF4], [SF5] Normal Common LFO Destination 1, 2, 3 From this display you can select the destination parameter for the LFO (which aspect of the sound the LFO controls), the elements to be affected by the LFO, and the LFO Depth. Three Destinations can be assigned, and you can choose from several parameters per Destination. • ElemSw (Element Switch) Determines whether or not each element is to be affected by the LFO. The element number (1- 4) is shown when the LFO is enabled; a dash (-) indicates the LFO is disabled for that element. • Dest (Destination) Determines the parameters which are to be controlled (modulated) by the LFO Wave. ❏ Settings AMD, PMD, FMD, RESO (Resonance), PAN, ELFOSpd (Element LFO Speed) • Depth Determines the LFO Wave Depth. ❏ Settings 0 ~ 127 Reference Voice mode 136 MOTIF Reference