Yamaha MOTIF7 Owner's Manual - Page 195
F2]-02 Modify V, elocity, F2]-03 Modify Gate Time, Adjusted velocity, original velocity
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
● [F2]-02 Modify Velocity This job alters the velocity values of the specified range of notes, letting you selectively boost or cut the volume of those notes. Velocity changes are calculated as follows: Adjusted velocity = (original velocity x Rate) + Offset. If the result is 0 or less, the value is set to 1. If the result is higher than 127, the value is set to 127. Track Range Song Job mode ● [F2]-03 Modify Gate Time This job alters the gate times of the specified range of notes. Gate time changes are calculated as follows: Adjusted gate time = (original gate time x Rate) + Offset. If the result is 0 or less, the value is set to 1. Track Range Reference Song mode • Set All Sets the velocities of all target notes to the same fixed value (1 to 127). When set to "OFF" the Set All parameter has no effect. When set to a value other than "OFF" the Rate and Offset parameters are unavailable and appear as "***" on the display. ❏ Settings OFF(0), 001~127 • Rate Determines the percentage by which the target notes will be shifted from their original velocities. Settings below 100% reduce the velocities, and settings above 100% increase the velocities proportionately. When the Set All parameter is not "OFF" this parameter appears as "***" and cannot be changed. ❏ Settings 000% ~ 200%, *** Original velocity (Vel) 96 64 48 32 Rate = 50% (Vel) 48 32 24 16 Rate = 150% (Vel) 127 96 72 48 • Offset Adds a fixed value to the Rate-adjusted velocity values. A setting of 0 produces no change. Settings below 0 reduce the velocities, and settings above 0 increase the velocities. When the Set All parameter is not "OFF" this parameter appears as "***" and cannot be changed. ❏ Settings -127 ~ +127, *** Original velocity (Vel) 96 Offset = -20 (Vel) 76 Offset = +20 (Vel) 116 64 48 32 44 28 12 84 68 52 • SetAll Sets the gate times of all target notes to the same fixed value. When set to "OFF" the Set All parameter has no effect. When set to a value other than "OFF" the Rate and Offset parameters are unavailable and appear as "***" on the display. ❏ Settings Off (0), 0001 ~ 9999 • Rate Determines the percentage by which the gate time of the target notes will be changed. Settings below 100% shorten the notes, and settings above 100% lengthen the notes proportionately. When the Set All parameter is not "OFF" this parameter appears as "***" and cannot be changed. ❏ Settings 000% ~ 200%, *** Original gate time (Gate) 32 32 32 48 Gate time rate = 50% (Gate) 16 16 16 24 Gate time rate = 150% (Gate) 48 48 48 72 • Offset Adds a fixed value to the Rate-adjusted gate time values. A setting of 0 produces no change. Settings below 0 shorten the gate time, and settings above 0 lengthen the gate time. When the Set All parameter is not "OFF" this parameter appears as "***" and cannot be changed. ❏ Settings -9999 ~ +9999, *** Original gate time (Gate) 32 32 32 48 Offset = -20 (Gate) 12 12 12 28 Offset = +20 (Gate) 52 52 52 68 MOTIF Reference 195