Yamaha MOTIF7 Owner's Manual - Page 74

Display-based Controls The available functions are shown at the top of the display, and the value changes as you turn the corresponding Knob. For example, to change the amount of Reverb (in the top row), turn Knob 2. To change the Pan position, turn Knob 1. If the "Rev" knob in the display is dark, any tweaking you do to the Knob immediately affects the sound. However, if the knob in the display is light, turning the knob will not have any effect until you reach the current setting. Once you've adjusted the Knob to that setting point, the display knob turns dark, and you can tweak the sound. 3 Move the appropriate Sliders ([CS1] - [CS4]) as well. MASTER VOLUME VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4 CS 1 CS 2 CS 3 CS 4 ZONE 1 ZONE 2 ZONE 3 ZONE 4 The Sliders are generally for controlling levels, but they have different functions depending on the selected mode. For example, in the Voice mode, they are used to adjust the levels of the four elements in a voice. In the Performance mode, they control the levels of the four parts. In the Song and Pattern modes, they are used to change the levels of the sixteen tracks - four at a time. (In the last case, you can select different groups of four by pressing the appropriate [NUMBER] button, [1] - [16].) Please note that moving the slider will not have any effect until you reach the current setting. For more information on the Knobs and Sliders, see page 48. Basic Operation 74 MOTIF Basic Operation