Yamaha MOTIF7 Owner's Manual - Page 283
Optional AIEB2 or mLAN8E Installation
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
4 Insert the board along the guide rails about twothirds of the way inside the MOTIF, with the connector side face up and toward you. 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE ASSIGNABLE OUTPUT R L OUTPUT R L MONO PHONES A D INPUT R L GAIN Slot 3 Slot 2 Slot 1 Securely insert the board into the appropriate slot, taking care that the board isn't jammed between slots. 5 With the board still protruding slightly from the expansion bay, bring the cable end around and connect it to the board. Make sure to connect the proper cable, matching the color of the cable to the slot used. Also, take care not to pull on the cable too forcefully as you connect it to the board. Plug-in Connector Notch Press the connectors together until the two notches lock into the sockets. Connector from MOTIF Plug-in board 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE Installing Optional Hardware 6 Insert the Plug-in board the rest of the way into the expansion bay. Carefully put the the ribbon cable back into the MOTIF, making sure that no part of the cable sticks out of the instrument. 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE ASSIGNABLE OUTPUT R L OUTPUT R L MONO PHONES A D INPUT R L GAIN 7 Replace the cover with the screw you removed in step 2 above. The Plug-in board is held in place by replacing the cover. 8 Check that the installed Plug-in board is functioning properly. Turn on the power. • A message appears indicating that the installed Plug-in Board is being checked. The main display then appears and the corresponding slot indicator at the right top of the front panel lights. This indicates that the board has been successfully installed. • If an error message appears, the MOTIF freezes after a while, indicating that the installation was not successful. If this happens, turn off the power and carefully go through the installation procedure again. In this example, a Plug-in board has been installed to slot 1. Slot indicator lamps DRUM KITS MUSIC PRODUCTION SYNTHESIZER Integrated Sampling Sequencer Real-time External Control Sur face Modular Synthesis Plug-in System SLOT 1 SLOT 2 SLOT 3 PRE 1 PRE 2 PRE 3 GM USER PLG 1 PLG 2 PLG 3 CATEGORY SEARCH BANK FAVORITES COMMON A.PIANO KEYBOARD ORGAN A B C GUITAR / PLUCKED D BASS E STRINGS BRASS REED/PIPE F G H SECTION GROUP SYN LEAD SYN PAD/ SYN COMP CHROMATIC DRUM / SE CHOIR PERCUSSION PERCUSSION MUSICAL FX COMBI Appendix ASSIGNABLE OUTPUT R L OUTPUT R L MONO PHONES A D INPUT R L GAIN n The Vocal Harmony Plug-in board (PLG100-VH) can installed only to slot 1. n The Multi part Plug-in board (PLG-100XG) can installed only to slot 3. Optional AIEB2 or mLAN8E Installation MOTIF Appendix 283