Yamaha MOTIF7 Owner's Manual - Page 167

Performance Edit mode With the exception of Pitch Bend, which cannot be set here, these parameters are the same as in the Voice Edit mode (page 132). ● [F2]-[SF1] Common Output KNOB CONTROL FUNCTION PAN REVERB CUTOFF RESONANCE ASSIGN A ASSIGN B CHORUS ATTACK ASSIGN 1 TEMPO RELEASE ASSIGN 2 KN 1 KN 2 KN 3 KN 4 MEQ LOW MEQLOWMID MEQ HI MID MEQ HIGH ❏ Settings -64 ~ +63 ● [F1]-[SF4] Common General Portamento From this display you can set the Portamento parameters for all parts of the selected performance. Portamento is used to create a smooth transition in pitch from the first note played on the keyboard to the next. • Switch Determines whether Portamento is on or off for the entire performance. Keep in mind that this is a global control; you can also switch Portamento on and off for individual parts in Part Switch below. ❏ Settings off, on • Time Determines the pitch transition time. This parameter offsets the same parameter in the part edit settings (page 170). Higher values result in longer transition times. ❏ Settings -64 ~ +63 • PartSwitch Determines whether Portamento is on or off for each individual part. • Volume Determines the output level of the selected performance. You can adjust the overall volume, keeping the balance between all parts . ❏ Settings 0 ~ 127 • Pan Determines the stereo pan position of the selected performance. This parameter offsets the same parameter in the part edit setting (page 163). You can also adjust this parameter using the PAN knob on the front panel. ❏ Settings L63 (Left) ~ C (Center) ~ R63 (Right) n A setting of "C" (center) maintains the individual Pan settings of each Part. • RevSend Determines the Send level of the signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Reverb effect. You can also adjust this parameter using the REVERB knob on the front panel. ❏ Settings 0 ~ 127 • ChoSend Determines the Send level of the signal sent from Insertion Effect 1/2 (or the bypassed signal) to the Chorus effect. You can also adjust this parameter using the [CHORUS] knob on the front panel. ❏ Settings 0 ~127 ● [F1]-[SF5] Common General Other From this display you can set the control functions for the Knobs and related parameters. Reference Performance mode MOTIF Reference 167