Yamaha MOTIF7 Owner's Manual - Page 199

● [F3]-03 Erase Event This Job clears all specified events from the specified range, effectively producing a segment of silence. Track Range • Event Type Determines the event type to be erased. All events are cleared when ALL is selected. Individual control change numbers can be specified when erasing control change events. ❏ Settings When TR is set to 01~16: Note (Note events), PC (Program Change), PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive), All (all events) When TR is set to "tmp" (Tempo): tmp (tempo) When TR is set to "scn" (Scene): Scene Memory (Scene change information), Track Mute (Track mute setting change information) n Keep in mind that applying this Job to a track with sample voices erases the events that trigger the samples, but it does not erase the actual samples themselves. ● [F3]-04 Extract Event This Job moves all instances of specified event data from a specified range of a track to the same range in a different track. One useful application for this would be to extract all instances of a certain note out of a track, and send them to a new track for separate editing. Track and range in which data is extracted Song Job mode ❏ Settings Note (Note : Note number), PC (Program Change), PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), PAT (Polyphonic Aftertouch), EXC (System Exclusive) • Destination track ❏ Settings 01~16 ● [F3]-05 Create Continuous Data This Job creates continuous pitch bend or control change data over the specified range. Track Range • Event Type Determines the event type to be created. ❏ Settings PB (Pitch Bend), CC: 000-127, all (Control Change, Control Change number), CAT (Channel Aftertouch), EXC (System Exclusive), tmp (Tempo) • Data Range Determines the lower and upper limits for the data range to be created. The left value is the lower limit, and the right value is the upper limit. ❏ Settings When Event Type is set to PB -8192~+8191 When Event Type is set to tmp:1.0~300.0 When Event Type is set to other :0~127 • Clock Determines the number of clocks to be inserted between each created event. ❏ Settings 001~999 • Curve Determines the "curve" of the continuous data. Refer to the graph below for approximate curve shapes. ❏ Settings -16 ~+16 Curve=+16 Curve=0((linear) Curve=-16 Reference Song mode Destination track Start • Track and range in which data is extracted point ❏ Settings Track 01~16 Range 001:1:000~999:16:479 • Event Type Selects the event type to be extracted. Specific note and control change numbers can also be specified as required. End point This distance specified by Clock MOTIF Reference 199