Yamaha MOTIF7 Owner's Manual - Page 264
F1] Configuration, File types that can be loaded from the, Memory Card/SCSI storage device to
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
File mode • Wav Extension: .WAV A WAV file (Windows audio format) can be loaded to the MOTIF and can be used as a User Wave. • Aif (AIFF file) Extension: .AIF An AIFF file (Macintosh audio format) can be loaded to the MOTIF and can be used as a User Wave. n In addition to the file types above, Yamaha A5000/ A4000/A3000/SU700 files and AKAI S1000/ S3000 files can be loaded to the MOTIF. ■ File types that can be loaded from the Memory Card/SCSI storage device to the MOTIF when turning the power on (Auto Load file) Among the file types described on page 262, "All", "Plugin All Bulk 1", "Plugin All Bulk 2" and "Plugin All Bulk 3" can be loaded from the Memory card/SCSI storage device to the MOTIF's User Memory automatically when turning the power on. 1 Name the files you wish to have load automatically when the power is turned on as described below, and save them together in a single folder. File type All Plugin All Bulk 1 (for slot 1) Plugin All Bulk 2 (for slot 2) Plugin All Bulk 3 (for slot 3) File name AUTOLOAD.W2A AUTOLD1.W2B AUTOLD2.W2B AUTOLD3.W2B n After you've finished naming the appropriate files, keep the corresponding folder selected in the display and go to step #2. 2 Press the [UTILITY] button to enter the Utility mode. 3 Press the [F1] button, then press the [SF4] button to show the Auto Load file display. 4 Set "Auto Load" to on, and press the [SF5] button. Set this to on. 5 Turn the power off. 6 Before turning the power on next time, make sure that the appropriate data is available to the MOTIF. In other words, make sure memory card specified in step #1 is properly inserted, or that the SCSI device specified in step #1 is properly connected. 7 Turn the power on. The MOTIF searches the device and specified folder for the auto-load files (the files you named and saved in step #1), and automatically loads them to User memory. n Any files in the device and folder registered in step #4 that do not have appropriate auto-load names are ignored. ■ File names Files are named according to the MS-DOS naming convention. If the file name contains spaces and other characters unrecognized in MS-DOS, these characters will automatically be replaced by "_" (underscore) characters when saving. For specific instructions on naming files, see page 267. [F1] Configuration The explanations here apply to step #2 of the Basic Procedure on page 262. ● [F1]-[SF1] CONFIG Currently recognized device Volume label of the device Amount of unused (free) memory on the device Amount of total memory on the device • Current In this display you can select the device to be recognized by the MOTIF - a memory card inserted to the Card slot or a properly connected SCSI device. ❏ Settings Card, SCSI Reference File mode Press the [SF5] button to register the device and folder selected in step #1 (the folder containing the desired files for auto loading). 264 MOTIF Reference