Yamaha MOTIF7 Owner's Manual - Page 272
status for all of the zones., Switch settings for a single selected zone., Change, Change messages.
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
Master Edit mode • TransmitCh (Transmit Channel) Determines the MIDI Transmit Channel for each zone. ❏ Settings 1~16 • TGSwitch (Tone Generator Switch) Determines whether or not to transmit MIDI messages for each zone to each Part's tone generator block. ❏ Settings on, off • MIDISwitch Determines whether or not to transmit MIDI messages for each zone to an external MIDI device via the MIDI or USB terminal. ❏ Settings on, off ● [F2] Zone Note From this display you can set the pitch- and keyboard-related parameters for each zone - allowing you to set up zone splits and determine the pitch range for each zone. • This display type shows the Transmit Switch status for all of the zones. Set the desired zone on or off, for the corresponding MIDI data type. Keep in mind that since all the available parameters cannot be simultaneously displayed, you will need to use the cursor controls to scroll the display in order to see and set the other parameters. • This display type shows all of the Transmit Switch settings for a single selected zone. Set the desired MIDI data type on or off for the selected zone. To select other zone, use the NUMBER [1] - [4] buttons (making sure that the [TRACK SELECT] button is on). [SF5] button [SF5] button • Octave Determines the amount in octaves by which the range of the zone is shifted up or down. ❏ Settings -3~0 (Default)~+3 • Transpose Determines the amount in semitones by by which the range of the zone is shifted up or down. ❏ Settings -11 ~ 0 (Default) ~ +11 • NoteLimit H, L (High, Low) Determines the lowest and highest notes of the range for each zone. The selected zone will sound only when you play notes within this range. ❏ Settings C -2 ~G8 n You can also set the range directly from the keyboard, by holding down the [INFORMATION] button and pressing the desired low and high keys. ● [F3] Zone Transmit Switch From this display you can set how the playing of each individual zone affects transmission of various MIDI data, such as Control Change and Program Change messages. When the relevant parameter is set to "on," playing the selected zone will transmit the corresponding MIDI data. Note that two different display types are provided (see below). Each display type features the same settings in a different format; use the type you feel most comfortable with. ● [F4] Zone Preset From this display you can make the voice-related settings for each zone, in the selected Master program number. In this way, selecting a different Master automatically calls up a completely different set of voices and voice-related setttings for the four zones. • BankMSB, BankLSB, PgmChange (Program Change) Determines the voice assignment for each zone in the selected Master. ❏ Settings Refer to the Voice List in the separate Data List booklet. • Volume Determines the output level of each zone. ❏ Settings 0~127 • Pan Determines the stereo pan position of each zone. ❏ Settings L64 (Left) ~ C (Center) ~ R63 (Right) 272 MOTIF Reference Reference Master mode