Yamaha MOTIF7 Owner's Manual - Page 201

[F4] Measure Job Press the [F4] button in step #3 of the Basic Procedure on page 193 so that the Measure Job list appears on the display. Scroll the cursor to the desired Job and press the [ENTER] button to go to the display of the selected Job. Song Job mode n If the insert point is set after the last measure containing data, only the meter data at that point is set without actually inserting the measures. ● [F4]-02 Delete Measure This Job deletes the specified measures. Measure and meter data following the deleted measures are moved backward accordingly. Reference Song mode The following explanations apply to step #6 of the Basic Procedure on page 193. ● [F4]-01 Create Measure This Job creates empty measures at the specified location in all tracks. Delete Range Original data 001 ~ 004 005 ~ 012 013 ~ 024 Measures M005 ~ M012 deleted 001 ~ 004 005 ~ 016 Meter (time signature) of measures to be inserted Number of measures to be inserted Insertion point (measure number) Original data 001~ 004 005 ~ 016 8 measures inserted at measure 5 001~ 004 005 ~ 012 013 ~ 024 The inserted 8 measures • Meter of measures to be inserted Determines the meter or time signature of the measures to be created. You may find it convenient to use this parameter when you need to create a song that incorporates meter changes. ❏ Settings 1/16~16/16, 1/8~16/8, 1/4~8/4 • Insertion point (Measure number) Determines the insert point (measure number) at which the newly created blank measures will be inserted. ❏ Settings 001~999 • Number of measures to be inserted Determines the number of empty measures to be created and inserted. ❏ Settings 01~99 n When empty measures are inserted, measure and meter data following the insert point are moved forward accordingly. • Delete Range ❏ Settings 001~999 n Keep in mind that applying this Job to a range of measures with sample voices erases the events that trigger the samples, but it does not erase the actual samples themselves. [F5] Track Job Press the [F5] button in step #3 of the Basic Procedure on page 193 so that the Track Job list appears on the display. Scroll the cursor to the desired Job and press the [ENTER] button to go to the display of the selected Job. The following explanations apply to step #6 of the Basic Procedure on page 193. MOTIF Reference 201