Yamaha MOTIF7 Owner's Manual - Page 192
Event View Filter, Non Registered Parameter Number NRPN, System Exclusive Exc
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Song Edit mode • RPN MSB-LSB ❏ Settings 000~127 • Data Entry MSB-LSB ❏ Settings 000~127 n Normally three types of control change data are sent: RPN MSB (101), RPN LSB (100), and Data Entry MSB (6). In the MOTIF, Data Entry LSB (38) is added to this and the resulting group of control change events is handled as one in this display. For a complete list of the available RPN and NRPN numbers and their corresponding controls, refer to the MIDI Data Format in the separate Data List booklet. ■ Non Registered Parameter Number (NRPN) This event changes parameter values for each tone generator part. This event is used to edit sounds via MIDI, allowing you to edit filter or EG settings, or adjust the pitch or level for each instrument of a drum voice. For a complete list of the available NRPN numbers and their corresponding controls, refer to the MIDI Data Format in the separate Data List booklet. ■ System Exclusive (Exc) A type of MIDI message used to exchange data unique to a specific model or type of device. Unlike with other MIDI events, these events differ depending on the manufacturer/device, and are incompatible among different devices. • Data ❏ Settings Data 00 ~7F, F7 (Data must be entered in hexadecimal format. Event View Filter The explanations here apply to step #3 of the Basic Procedure on page 189. The MOTIF's "Event View Filter" lets you select the event types that appear on the Event List display. For example, if you wish to edit only note events, place a checkmark in the box next to "Note" as shown below so that only the note events appear in the Event List display. RPN MSB-LSB • NRPN MSB-LSB ❏ Settings 000~127 Data Entry MSB-LSB • Data Entry MSB-LSB ❏ Settings 000~127 n Normally three types of control change data are sent: NRPN MSB (99), NRPN LSB (98), and Data Entry MSB (6). In the MOTIF, this group of control change events is handled as one in this display. For a complete list of the available RPN and NRPN numbers and their corresponding controls, refer to the MIDI Data Format in the separate Data List booklet. When the Control Change box is checkmarked, you can specify the desired Control Change number. Press the [F5] button to remove all checkmarks at once. Press the [F6] button to set checkmarks into all boxes. Reference Song mode 192 MOTIF Reference