Yamaha MOTIF7 Owner's Manual - Page 150
Drum Key Edit, in the separate Data List booklet.
View all Yamaha MOTIF7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Voice Edit mode ● [F6]-[SF2], [SF3], [SF4], [SF5] Drum Common Effect Parameter Insertion 1, 2, Reverb, Chorus The number of parameters and values available differs depending on the currently selected effect type. For more information, see the Effect Type List in the separate Data List booklet. ● [F1]-[SF2] Drum Key Oscillator Output From this display you can set certain output parameters for the selected Drum key. Reference Voice mode ■ Drum Key Edit ● [F1]-[SF1] Drum Key Oscillator Wave From this display you can select the desired wave or Normal voice used for the individual Drum key. • Type Determines whether a Wave or a Normal voice is to be used for the selected key. Also, use the Bank, Number and Category parameters below to specify the desired Wave or Normal voice. ❏ Settings pre wave (Preset wave), voice, usr wave (User wave) n When the Type is set to "voice" here, some parameters in the Drum Voice Edit mode cannot be edited. • ElementSw (Element Switch) This parameter is available when Type (above) is set to "pre wave" or "user wave." This determines whether the currently selected key is on or off, or in other words, whether the wave for the key is active or inactive. ❏ Settings on, off • Bank This parameter is available when Type (above) is set to "voice." Any of the Normal voice banks can be selected. n Plug-in voices cannot be selected for Drum keys. • Number Determines the Wave/Voice number. The number differs depending on the selected Type. ❏ Settings When Type is set to "pre wave": 001 ~ 1309 When Type is set to "voice": 001 ~ 128 When Type is set to "usr wave": 001 ~ 256 For more information about available Waves and Voices, refer to the separate Data List booklet. • Category Determines the Category of the Wave/Normal Voice. If you switch to another Category, the first Wave/Normal Voice in that Category will be selected. ❏ Settings For more information about the Categories, refer to the separate Data List booklet. • InsEFOut (Insertion Effect Output) Determines which Insertion effect (1 or 2) is used to process each individual Drum key. The "thru" setting lets you bypass the Insertion effects for the specific key. ❏ Settings thru, ins1 (Insertion Effect 1), ins2 (Insertion Effect 2) • RevSend (Reverb Send) Determines the level of the Drum key sound (the bypassed signal) that is sent to Reverb effect. A setting of "0" results in no Reverb processing of the Drum key sound. This is available only when Insertion Effect Output (above) is set to "thru." ❏ Settings 0 ~ 127 • ChoSend (Chorus Send) Determines the level of the Drum key sound (the bypassed signal) that is sent to Chorus effect. A setting of "0" results in no Chorus processing of the Drum key sound. This is available only when Insertion Effect Output (above) is set to "thru." ❏ Settings 0 ~ 127 • OutputSel (Output Select) Determines the specific output(s) for the individual Drum key signal. You can assign each individual Drum key sound to be output from a specific hardware output jack on the rear panel. By installing the optional AIEB2 board, you can expand the number of assignable outputs. ❏ Settings See below. LCD Output jacks Stereo/ Mono L&R OUTPUT L and R Stereo asL&R ASSIGNABLE OUTPUT L and R Stereo as1&2 ASSIGNABLE OUTPUT 1 and 2 on the AIEB2 Stereo * 1 : L 2 : R as3&4 ASSIGNABLE OUTPUT 3 and 4 on the AIEB2 Stereo * 3 : L 4 : R as5&6 ASSIGNABLE OUTPUT 5 and 6 on the AIEB2 Stereo * 5 : L 6 : R asL ASSIGNABLE OUTPUT L Mono asR ASSIGNABLE OUTPUT R Mono as1 ASSIGNABLE OUTPUT 1 on the AIEB2 Mono * as2 ASSIGNABLE OUTPUT 2 on the AIEB2 Mono * as3 ASSIGNABLE OUTPUT 3 on the AIEB2 Mono * as4 ASSIGNABLE OUTPUT 4 on the AIEB2 Mono * as5 ASSIGNABLE OUTPUT 5 on the AIEB2 Mono * as6 ASSIGNABLE OUTPUT 6 on the AIEB2 Mono * * Available only when the optional AIEB2 board has been installed. 150 MOTIF Reference