Yamaha MOTIF7 Owner's Manual - Page 282

Installing Optional Hardware Optional Plug-in Board Installation A variety of optional Plug-in boards sold separately let you expand the voice library of your instrument. The following types of Plug-in boards can be used with your instrument. • PLG150-AN • PLG150-PF • PLG150-VL • PLG150-DX • PLG100-XG • PLG100-VH The MOTIF provides three slots for the Plug-in board. Therefore, up to three boards can be installed to the rear panel. n The Vocal Harmony Plug-in board (PLG100-VH) can installed only to slot 1. n The Multi part Plug-in board (PLG-100XG) can installed only to slot 3. n The Single part Plug-in board can installed to any of three slots. 1 Turn the MOTIF power off, and disconnect the AC power cord. Also, make sure to disconnect the MOTIF from any connected external devices. 2 Remove the large screw from the expansion bay cover on the rear panel using a Phillips screwdriver. Keep the removed screw in a safe place. It will be used when attaching the cover to the MOTIF again. MOTIF6 / MOTIF7 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE MOTIF8 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE 3 Remove the ribbon cables that are to be connected to the Plug-in board from the inside of the MOTIF. The slots are assigned to the color-coded cables as follows: Slot 1 - Orange Slot 2 - Yellow Slot 3 - Green Cable for Slot 3 (Green) Cable for Slot 2 (Yellow) Cable for Slot 1 (Orange) 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE Slot 3 Slot 2 Slot 1 ASSIGNABLE OUTPUT R L OUTPUT R L MONO PHONES A D INPUT R L GAIN ASSIGNABLE OUTPUT R L OUTPUT R L MONO PHONES A D INPUT R L GAIN 3 GREEN 2 YELLOW Plug- in SLOT 1 ORANGE ASSIGNABLE OUTPUT R L OUTPUT R L MONO PHONES A D INPUT R L GAIN Appendix 282 MOTIF Appendix