Yamaha MOTIF7 Owner's Manual - Page 252

Utility mode ● [F1]-[SF3] General Effect Bypass From this display you can select the specific effect(s) to be bypassed when the [EFFECT BYPASS] button (page 13) is turned on. EFFECT BYPASS INSERTION SYSTEM ❏ Settings on (bypassed), off ● [F1]-[SF4] General Other Device and folder which contains the files to be auto-loaded (set by pressing the [SF5] button). Press the [SF5] button to register the most recently selected device/folder for auto loading. n For details, see page 264. • Auto Load Determines whether the Auto Load function is on or off. When this is on, the MOTIF will automatically load the specified files (from memory card or SCSI storage device) to User memory - whenever the power is turned on. (See above illustration for additional explanations.) ❏ Settings on, off • Auto DemoLoad The MOTIF features special Demo song data, which is stored to ROM and should be loaded to DRAM for proper operation (page 64). When this parameter is set to "on," the Demo song data is automatically loaded when the power os turned on. This parameter determines whether the Demo song data is automatically loaded (on) or not (off) when turning the power on. ❏ Settings on, off n When Auto Load is set to on, the Auto Demo Load parameter cannot be set. Performance When you switch the MOTIF on, the Performance Play mode is entered and the first program number (USER: 001) is selected automatically. Voice (User) When you switch the MOTIF on, the Voice Play mode is entered and the first program number of the User Voices (USER: 001) is selected automatically. Voice (PRE1) When you switch the MOTIF on, the Voice Play mode is entered and the first program number of the Preset Voices (PRE 1: 001) is selected automatically. GM When you switch the MOTIF on, the Voice Play mode is entered and the first program number of the GM Voices (GM: 001) is selected automatically. last When you switch the MOTIF on, the Voice/Performance Program Number selected before you switched the power off is recalled. Master When you switch the MOTIF on, the Master Play mode is entered and the first program number (001) is selected automatically. • CtrlReset (Controller Reset) Determines the status of the controllers (Modulation Wheel, Aftertouch, Knobs, etc.) when switching between voices. When this is set to "off," the controllers are kept at the current setting. When this is set to "on," the controllers are reset to the default states (below). ❏ Settings on, off If you select "on," the controllers will be reset to the following states/positions: Pitch Bend Modulation Wheel Aftertouch Foot Controller Breath Controller Foot Switch Expression Foot Volume Sustain Center Minimum Minimum Maximum Maximum Off Maximum Maximum Off [F2] Interface settings ● [F2]-[SF1] I/O Input From this display you can set parameters related to audio input. Reference Utility mode If this parameter is set to on, all User Voice, Performance, Master, and System settings will be initialized to the Factory settings when switching the power on the next time. Important data should always be backed up to a separate Memory Card or some other storage device. • PowerOnMode This determines the default power-on mode (and memory bank) for the MOTIF - letting you select which condition is automatically called up when you turn the power on. ❏ Settings See below. 252 MOTIF Reference • A/DSource The MOTIF features two different input connections for transferring analog audio from an external device: the A/ D INPUT jacks or the mLAN terminal (when an optional mLAN8E is installed). One or the other must be set; the two cannot be used at the same time. ❏ Settings analog (A/D INPUT jack), mLAN