Yamaha MOTIF7 Owner's Manual - Page 168

Performance Edit mode ● [F2]-[SF2] Common MEQ(Master Equalizer) From this display you can apply five-band equalization to all parts of the selected performance. ˙ Gain 0 Q(Frequency Characteristic) Freq (Frequency ) • Gain Determines the level gain for the Frequency (set above), or the amount the selected frequency band is attenuated or boosted. ❏ Settings -12dB ~ 0dB ~ +12dB • Q (Frequency Characteristic) This varies the signal level at the Frequency setting to create various frequency curve characteristics. ❏ Settings 0.1 ~ 12.0 0.1 12.0 Frequency Freq 5 bands LOW LOWMID MID HIGHMID HIGH • Shape Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below the specified Frequency setting. This parameter is available for LOW, MID, and HIGH. ❏ Settings shelv (Shelving type), peak (Peaking type) shelv (Shelving) + 0 - EQ Low EQ Low Freq1 Freq2 peak (Peaking) + Frequency 0 Gain Frequency - Freq • Freq (Frequency) Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting. ❏ Settings LOW: Shelving 32Hz ~ 2.0kHz Peaking 63Hz ~ 2.0kHz LOW MID, MID, HIGH MID: 100Hz ~ 10.0kHz High: 500Hz ~ 16.0kHz ● [F3]-[SF1] Common Arpeggio Arpeggio type Basic Structure (page 55) Same as in Normal Voice Common Edit. See page 132. ● [F3]-[SF2] Common Arpeggio Arpeggio limit Same as in Normal Voice Common Edit. See page 133. ● [F3]-[SF3] Common Arpeggio Play FX (Effect) Same as in Normal Voice Common Edit. See page 133. ● [F3]-[SF4] Common Arpeggio Output channel From this display you can set a separate MIDI output channel for the Arpeggio playback data, letting you have the Arpeggio sound from an external tone generator or synthesizer. Reference Performance mode 168 MOTIF Reference