ZyXEL ZyWALL 5 User Guide - Page 200
WAN Screens, ZyWALL 5/35/70 Series User's Guide, NETWORK > WAN > Dial Backup
View all ZyXEL ZyWALL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Chapter 9 WAN Screens The following table describes the labels in this screen. Table 47 NETWORK > WAN > Dial Backup LABEL DESCRIPTION Dial Backup Setup Enable Dial Backup Select this check box to turn on dial backup. Basic Settings Login Name Type the login name assigned by your ISP. Password Type the password assigned by your ISP. Retype to Confirm Type your password again to make sure that you have entered is correctly. Authentication Type Use the drop-down list box to select an authentication protocol for outgoing calls. Options are: CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by this remote node. CHAP - Your ZyWALL accepts CHAP only. PAP - Your ZyWALL accepts PAP only. Primary/ Secondary Phone Number Type the first (primary) phone number from the ISP for this remote node. If the Primary Phone number is busy or does not answer, your ZyWALL dials the Secondary Phone number if available. Some areas require dialing the pound sign # before the phone number for local calls. Include a # symbol at the beginning of the phone numbers as required. Dial Backup Port Speed Use the drop-down list box to select the speed of the connection between the Dial Backup port and the external device. Available speeds are: 9600, 19200, 38400, 57600, 115200 or 230400 bps. AT Command Initial Type the AT command string to initialize the WAN device. Consult the manual of String your WAN device connected to your Dial Backup port for specific AT commands. Advanced Modem Click Edit to display the Advanced Setup screen and edit the details of your dial Setup backup setup. TCP/IP Options Get IP Address Type the login name assigned by your ISP for this remote node. Automatically from Remote Server Used Fixed IP Address Select this check box if your ISP assigned you a fixed IP address, then enter the IP address in the following field. My WAN IP Address Leave the field set to 0.0.0.0 (default) to have the ISP or other remote router dynamically (automatically) assign your WAN IP address if you do not know it. Type your WAN IP address here if you know it (static). This is the address assigned to your local ZyWALL, not the remote router. Enable NAT (Network Address Translation) Network Address Translation (NAT) allows the translation of an Internet protocol address used within one network to a different IP address known within another network. Select the check box to enable NAT. Clear the check box to disable NAT so the ZyWALL does not perform any NAT mapping for the dial backup connection. Enable RIP Select this check box to turn on RIP (Routing Information Protocol), which allows a router to exchange routing information with other routers. 200 ZyWALL 5/35/70 Series User's Guide