ZyXEL ZyWALL 5 User Guide - Page 259

Chapter 13 Firewall Screens 13.5 The Firewall Rule Summary Screen Click SECURITY > FIREWALL > Rule Summary to open the screen. This screen displays a list of the configured firewall rules. " The ordering of your rules is very important as rules are applied in the order that they are listed. See Section 13.1 on page 251 for more information about the firewall. Figure 147 SECURITY > FIREWALL > Rule Summary The following table describes the labels in this screen. Table 71 SECURITY > FIREWALL > Rule Summary LABEL DESCRIPTION Packet Direction Use the drop-down list boxes and click Refresh to select a direction of travel of packets for which you want to display firewall rules. Note: The VPN connection directions apply to the traffic going to or from the ZyWALL's VPN tunnels. They do not apply to other VPN traffic for which the ZyWALL is not one of the gateways (VPN pass-through traffic). +/- In the heading row, click + to expand or - to collapse the Source Address, Destination Address and Service Type drop down lists for all of the displayed rules. Default Policy This field displays the default action you selected in the Default Rule screen for the packet direction displayed. The following fields summarize the rules you have created that apply to traffic traveling in the selected packet direction. The firewall rules that you configure (summarized below) take priority over the general firewall action settings above. # This is your firewall rule number. The ordering of your rules is important as rules are applied in turn. Click + to expand or - to collapse the Source Address, Destination Address and Service Type drop down lists. Name This is the name of the firewall rule. Active This field displays whether a firewall is turned on (Y) or not (N). Click the setting to change it. ZyWALL 5/35/70 Series User's Guide 259