ZyXEL ZyWALL 5 User Guide - Page 242

Chapter 12 Wireless Screens Figure 137 WIRELESS > Wi-Fi > Wireless Card: No Access 802.1x + Static WEP The following wireless LAN security fields become available when you select No Access 802.1x + Static WEP in the Security drop down list-box. Table 65 WIRELESS > Wi-Fi > Wireless Card: No Access 802.1x + Static WEP LABEL DESCRIPTION Security Select No Access 802.1x + Static WEP from the drop-down list. WEP Encryption WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized wireless stations from accessing data transmitted over the wireless network. Select 64-bit WEP or 128-bit WEP to enable data encryption. Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters (ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key. If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters (ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each key. There are four data encryption keys to secure your data from eavesdropping by unauthorized wireless users. The values for the keys must be set up exactly the same on the access points as they are on the wireless stations. Apply Click Apply to save your changes back to the ZyWALL. Reset Click Reset to begin configuring this screen afresh. 12.2.8 No Access 802.1x + No WEP Click the NETWORK > WIRELESS CARD or NETWORK > Wi-Fi to display the Wireless Card screen. Select No Access 802.1x + No WEP to deny all wireless stations access to your wired network and block all wireless stations from communicating with the ZyWALL. 242 ZyWALL 5/35/70 Series User's Guide