ZyXEL ZyWALL 5 User Guide - Page 665
My WAN Addr, Gateway IP Addr
View all ZyXEL ZyWALL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 665 highlights
Chapter 42 Remote Node Setup Figure 404 Menu 11.1.2: Remote Node Network Layer Options for Ethernet Encapsulation Menu 11.1.2 - Remote Node Network Layer Options IP Address Assignment= Dynamic Rem IP Addr= N/A Rem Subnet Mask= N/A My WAN Addr= N/A Network Address Translation= SUA Only NAT Lookup Set= 255 Metric= 1 Private= No RIP Direction= None Version= N/A Multicast= None Enter here to CONFIRM or ESC to CANCEL: This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP Addr field for Ethernet encapsulation. The following table describes the fields in this menu. Table 238 Remote Node Network Layer Options Menu Fields FIELD DESCRIPTION IP Address Assignment If your ISP did not assign you an explicit IP address, press [SPACE BAR] and then [ENTER] to select Dynamic; otherwise select Static and enter the IP address & subnet mask in the following fields. (Rem) IP Address If you have a static IP Assignment, enter the IP address assigned to you by your ISP. (Rem) IP If you have a static IP Assignment, enter the subnet mask assigned to you. Subnet Mask Gateway IP Addr This field is applicable to Ethernet encapsulation only. Enter the gateway IP address assigned to you if you are using a static IP address. My WAN Addr This field is applicable to PPPoE and PPTP encapsulations only. Some implementations, especially the UNIX derivatives, require the WAN link to have a separate IP network number from the LAN and each end must have a unique address within the WAN network number. If this is the case, enter the IP address assigned to the WAN port of your ZyWALL. Note that this is the address assigned to your local ZyWALL, not the remote router. Network Address Translation Network Address Translation (NAT) allows the translation of an Internet protocol address used within one network (for example a private IP address used in a local network) to a different IP address known within another network (for example a public IP address used on the Internet). Choose None to disable NAT. Choose SUA Only if you have a single public IP address. SUA (Single User Account) is a subset of NAT that supports two types of mapping: Many-to-One and Server. Choose Full Feature if you have multiple public IP addresses. Full Feature mapping types include: One-to-One, Many-to-One (SUA/PAT), Many-to-Many Overload, Many- One-to-One and Server. When you select Full Feature you must configure at least one address mapping set. See Chapter 22 on page 435 for a full discussion on this feature. ZyWALL 5/35/70 Series User's Guide 665