ZyXEL ZyWALL 5 User Guide - Page 70
factory defaults. The budget counters are saved to the flash - vpn client
View all ZyXEL ZyWALL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 3 Introducing the Web Configurator Table 4 Web Configurator HOME Screen in Router Mode (continued) LABEL DESCRIPTION Disable budget control This field displays if you have enabled budget control but insert a 3G card with a different user account from the one for which you configured budget control. Select this option to disable budget control. If you want to enable and configure new budget control settings for the new user account, go to the 3G (WAN 2) screen. The ZyWALL keeps the existing statistics if you do not change the budget control settings. You could reinsert the original card and enable budget control to have the ZyWALL continue counting the budget control statistics. Apply Click Apply to save your changes in this section. Enter modem unlock code This field only displays when you insert a 3G card and the internal modem on the 3G card is blocked. Enter a key to enable the internal modem on your 3G card. By default, the key is the last four digits of your phone number used to dial up the 3G connection. Otherwise, you need to get the key from your service provider. Apply Click Apply to save your changes in this section. Remaining Time Budget This displays when you enable budget control in the 3G (WAN 2) screen. This shows the amount of time the 3G connection can still be used before the ZyWALL takes the actions you specified in the 3G (WAN 2) screen. Remaining Data Budget This displays when you enable budget control in the 3G (WAN 2) screen. This shows how much data (in bytes) can still be transmitted through the 3G connection before the ZyWALL takes the actions you specified in the 3G (WAN 2) screen. Reset time and data budget counters Latest Alerts Date/Time Message System Status Port Statistics DHCP Table VPN Bandwidth Note: The budget counters will not be reset when you restore the factory defaults. The budget counters are saved to the flash every hour or when the 3G connection is dropped. If you restart the ZyWALL within one hour, any change in the counters will not be saved. This displays when you enable budget control in the Network > WAN > 3G (WAN 2) screen. Click this button to reset the time and data budgets immediately. The count starts over with the 3G connection's full configured monthly time and data budgets. This does not affect the normal monthly budget restart. This table displays the five most recent alerts recorded by the ZyWALL. You can see more information in the View Log screen, such as the source and destination IP addresses and port numbers of the incoming packets. This is the date and time the alert was recorded. This is the reason for the alert. Click Port Statistics to see router performance statistics such as the number of packets sent and number of packets received for each port. Click DHCP Table to show current DHCP client information. Click VPN to display the active VPN connections. Click Bandwidth to view the ZyWALL's bandwidth usage and allotments. 70 ZyWALL 5/35/70 Series User's Guide