ZyXEL ZyWALL 5 User Guide - Page 241
No Access 802.1x + Static WEP
View all ZyXEL ZyWALL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Chapter 12 Wireless Screens Figure 136 WIRELESS > Wi-Fi > Wireless Card: 802.1x + No WEP The following wireless LAN security fields become available when you select 802.1x + No WEP in the Security drop down list-box. Table 64 WIRELESS > Wi-Fi > Wireless Card: 802.1x + No WEP LABEL DESCRIPTION Security Select 802.1x + No WEP from the drop-down list. ReAuthenticatio n Timer (Seconds) Specify how often wireless stations have to resend user names and passwords in order to stay connected. Enter a time interval between 10 and 65535 seconds. If wireless station authentication is done using a RADIUS server, the reauthentication timer on the RADIUS server has priority. Idle Timeout (Seconds) The ZyWALL automatically disconnects a wireless station from the wireless network after a period of inactivity. The wireless station needs to send the username and password again before it can use the wireless network again. Some wireless clients may prompt users for a username and password; other clients may use saved login credentials. In either case, there is usually a short delay while the wireless client logs in to the wireless network again. This value is usually smaller when the wireless network is keeping track of how much time each wireless station is connected to the wireless network (for example, using an authentication server). If the wireless network is not keeping track of this information, you can usually set this value higher to reduce the number of delays caused by logging in again. Authentication Databases Click Local User to go to the Local User Database screen where you can view and/or edit the list of users and passwords. Click RADIUS to go to the RADIUS screen where you can configure the ZyWALL to check an external RADIUS server. Apply Click Apply to save your changes back to the ZyWALL. Reset Click Reset to begin configuring this screen afresh. 12.2.7 No Access 802.1x + Static WEP Click WIRELESS > Wi-Fi > Wireless Card to display the Wireless Card screen. Select No Access 802.1x + Static WEP to deny all wireless stations access to your wired network and allow wireless stations to communicate with the ZyWALL using static WEP keys for data encryption. ZyWALL 5/35/70 Series User's Guide 241