ZyXEL ZyWALL 5 User Guide - Page 563
Table 174, Table 175, Table 173
View all ZyXEL ZyWALL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 563 highlights
Chapter 32 Logs Screens Table 173 System Maintenance Logs (continued) LOG MESSAGE DESCRIPTION %s The myZyXEL.com service registration failed due to the error listed. If you are unable to register for services at myZYXEL.com, the error message displayed in this log may be useful when contacting customer support. Remote node is connecting. A remote user is connecting using PPP. Other PPP connection requests must wait until this process is complete. Remote node is dropping A remote user is releasing a PPP connection. Other PPP connection requests must wait until this process is complete. Table 174 System Error Logs LOG MESSAGE %s exceeds the max. number of session per host! setNetBIOSFilter: calloc error readNetBIOSFilter: calloc error WAN%d connection is up WAN connection is down. Dial Backup starts Dial Backup ends DHCP Server cannot assign the static IP %S (out of range). The DHCP static IP %s is conflict. SMTP fail (%s) SMTP authentication fail (%s) %s DESCRIPTION This attempt to create a NAT session exceeds the maximum number of NAT session table entries allowed to be created per host. The router failed to allocate memory for the NetBIOS filter settings. The router failed to allocate memory for the NetBIOS filter settings. The specified WAN connection is up. A WAN connection is down. You cannot access the network through this interface. Dial backup started working. Dial backup stopped working. The LAN subnet, LAN alias 1, or LAN alias 2 was changed and the specified static DHCP IP addresses are no longer valid. The static DHCP IP address conflicts with another host. The device failed to send an e-mail (error message included). The device failed to authenticate with the SMTP server (error message included). The device will send a Gratuitous ARP to detect the IP collision. If the collision happens, there will be a log in centralized log Table 175 Access Control Logs LOG MESSAGE Firewall default policy: [ TCP | UDP | IGMP | ESP | GRE | OSPF ] Firewall rule [NOT] match:[ TCP | UDP | IGMP | ESP | GRE | OSPF ] , DESCRIPTION Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access matched the default policy and was blocked or forwarded according to the default policy's setting. Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access matched (or did not match) a configured firewall rule (denoted by its number) and was blocked or forwarded according to the rule. ZyWALL 5/35/70 Series User's Guide 563