ZyXEL ZyWALL 5 User Guide - Page 590

Chapter 33 Maintenance Screens Table 200 MAINTENANCE > Time and Date (continued) LABEL DESCRIPTION End Date Configure the day and time when Daylight Saving Time ends if you selected Enable Daylight Saving. The o'clock field uses the 24 hour format. Here are a couple of examples: Daylight Saving Time ends in the United States on the first Sunday of November. Each time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United States you would select First, Sunday, November and 2:00. Daylight Saving Time ends in the European Union on the last Sunday of October. All of the time zones in the European Union stop using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The time you type in the o'clock field depends on your time zone. In Germany for instance, you would type 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Apply Click Apply to save your changes back to the ZyWALL. Reset Click Reset to begin configuring this screen afresh. 33.4.1 Time Server Synchronization Example Click the Synchronize Now button to get the time and date from the predefined time server or the time server you specified in the Time Server Address field. When the System Time and Date Synchronization in Process screen appears, wait up to one minute. Figure 343 Synchronization in Process Click the Return button to go back to the Time and Date screen after the time and date is updated successfully. Figure 344 Synchronization is Successful 590 If the update was not successful, the following screen appears. Click Return to go back to the Time and Date screen. ZyWALL 5/35/70 Series User's Guide