ZyXEL ZyWALL 5 User Guide - Page 72
Introducing the Web Configurator, ZyWALL 5/35/70 Series User's Guide, Web Configurator
View all ZyXEL ZyWALL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 3 Introducing the Web Configurator Table 5 Web Configurator HOME Screen in Bridge Mode (continued) LABEL DESCRIPTION Bootbase Version This is the bootbase version and the date created. Firmware Version This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's proprietary Network Operating System design. Click the field label to go to the screen where you can upload a new firmware file. Up Time This field displays how long the ZyWALL has been running since it last started up. The ZyWALL starts up when you turn it on, when you restart it (MAINTENANCE > Restart), or when you reset it (see Section 3.3 on page 63). System Time This field displays your ZyWALL's present date (in yyyy-mm-dd format) and time (in hh:mm:ss format) along with the difference from the Greenwich Mean Time (GMT) zone. The difference from GMT is based on the time zone. It is also adjusted for Daylight Saving Time if you set the ZyWALL to use it. Click the field label to go to the screen where you can modify the ZyWALL's date and time settings. Device Mode This displays whether the ZyWALL is functioning as a router or a bridge. Click the field label to go to the screen where you can configure the ZyWALL as a router or a bridge. Firewall This displays whether or not the ZyWALL's firewall is activated. Click the field label to go to the screen where you can turn the firewall on or off. System Resources Flash The first number shows how many megabytes of the flash the ZyWALL is using. Memory The first number shows how many megabytes of the heap memory the ZyWALL is using. Heap memory refers to the memory that is not used by ZyNOS (ZyXEL Network Operating System) and is thus available for running processes like NAT, VPN and the firewall. The second number shows the ZyWALL's total heap memory (in megabytes). The bar displays what percent of the ZyWALL's heap memory is in use. The bar turns from green to red when the maximum is being approached. Sessions The first number shows how many sessions are currently open on the ZyWALL. This includes all sessions that are currently traversing the ZyWALL, terminating at the ZyWALL or initiated from the ZyWALL The second number is the maximum number of sessions that can be open at one time. The bar displays what percent of the maximum number of sessions is in use. The bar turns from green to red when the maximum is being approached. CPU This field displays what percentage of the ZyWALL's processing ability is currently used. When this percentage is close to 100%, the ZyWALL is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management. Network Status Click more to display information about the individual interfaces. IP/Netmask Address This is the IP address and subnet mask of your ZyWALL in dotted decimal notation. Gateway IP Address This is the gateway IP address. Rapid Spanning This shows whether RSTP (Rapid Spanning Tree Protocol) is active or not. The Tree Protocol following labels or values relative to RSTP do not apply when RSTP is disabled. Bridge Priority This is the bridge priority of the ZyWALL. The bridge (or switch) with the lowest bridge priority value in the network is the root bridge (the base of the spanning tree). 72 ZyWALL 5/35/70 Series User's Guide