ZyXEL ZyWALL 5 User Guide - Page 556

Chapter 32 Logs Screens Figure 336 LOGS > View Log The following table describes the labels in this screen. Table 170 LOGS > View Log LABEL DESCRIPTION Display The categories that you select in the Log Settings page (see Section 32.3 on page 558) display in the drop-down list box. Select a category of logs to view; select All Logs to view logs from all of the log categories that you selected in the Log Settings page. Email Log Now Click Email Log Now to send the log screen to the e-mail address specified in the Log Settings page (make sure that you have first filled in the E-mail Log Settings fields in Log Settings, see Section 32.3 on page 558). Refresh Click Refresh to renew the log screen. Clear Log Click Clear Log to delete all the logs. The logs display in the table. Click a column's heading to sort the log entries by that criteria. # This field displays the log number. Time This field displays the time the log was recorded. See Section 33.4 on page 587 to configure the ZyWALL's time and date. Message This field states the reason for the log. Source This field lists the source IP address and the port number of the incoming packet. Destination This field lists the destination IP address and the port number of the incoming packet. Note This field displays additional information about the log entry. 32.2.1 Log Description Example The following is an example of how a log displays in the command line interpreter and a description of the sample log. Refer to Section on page 561 for more log message descriptions and the CLI Reference Guide for details on using the command line interpreter to display logs. # .time notes source destination message 556 ZyWALL 5/35/70 Series User's Guide