ZyXEL ZyWALL ATP700 User Guide - Page 137

Chapter 6 Monitor Table 32 Monitor > System Status > Interface Summary LABEL DESCRIPTION Status This field displays the current status of the interface. TxPkts RxPkts Tx B/s Rx B/s • Down - The interface is not connected. • Speed / Duplex - The interface is connected. This field displays the port speed and duplex setting (Full or Half). This field displays Connected and the accumulated connection time (hh:mm:ss) when the PPP interface is connected. This field displays the number of packets transmitted from the Zyxel Device on the interface since it was last connected. This field displays the number of packets received by the Zyxel Device on the interface since it was last connected. This field displays the transmission speed, in bytes per second, on the interface in the onesecond interval before the screen updated. This field displays the reception speed, in bytes per second, on the interface in the one-second interval before the screen updated. 6.4 The Traffic Statistics Screen Click Monitor > System Status > Traffic Statistics to display the Traffic Statistics screen. This screen provides basic information about the following for example: • Most-visited Web sites and the number of times each one was visited. This count may not be accurate in some cases because the Zyxel Device counts HTTP GET packets. Please see Table 33 on page 138 for more information. • Most-used protocols or service ports and the amount of traffic on each one • LAN IP with heaviest traffic and how much traffic has been sent to and from each one You use the Traffic Statistics screen to tell the Zyxel Device when to start and when to stop collecting information for these reports. You cannot schedule data collection; you have to start and stop it manually on the Traffic Statistics screen. Figure 121 Monitor > System Status > Traffic Statistics ZyWALL ATP Series User's Guide 137