ZyXEL ZyWALL ATP700 User Guide - Page 150
USB Storage Screen
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Chapter 6 Monitor Table 42 Monitor > System Status > UPnP Port Status (continued) LABEL DESCRIPTION Remote Host This field displays the source IP address (on the WAN) of inbound IP packets. Since this is often a wild-card, the field may be blank. When the field is blank, the Zyxel Device forwards all traffic sent to the External Port on the WAN interface to the Internal Client on the Internal Port. External Port Protocol Internal Port Internal Client Internal Client Type Description Delete All Refresh When this field displays an external IP address, the NAT rule has the Zyxel Device forward inbound packets to the Internal Client from that IP address only. This field displays the port number that the Zyxel Device "listens" non the WAN port) for connection requests destined for the NAT rule's Internal Port and Internal Client. The Zyxel Device forwards incoming packets (from the WAN) with this port number to the Internal Client on the Internal Port (on the LAN). If the field displays "0", the Zyxel Device ignores the Internal Port value and forwards requests on all external port numbers (that are otherwise unmapped) to the Internal Client. This field displays the protocol of the NAT mapping rule (TCP or UDP). This field displays the port number on the Internal Client to which the Zyxel Device should forward incoming connection requests. This field displays the DNS host name or IP address of a client on the LAN. Multiple NAT clients can use a single port simultaneously if the internal client field is set to 255.255.255.255 for UDP mappings. This field displays the type of the client application on the LAN. This field displays a text explanation of the NAT mapping rule. Click this to remove all mapping rules from the NAT table. Click this button to update the information on the screen. 6.12 USB Storage Screen This screen displays information about a connected USB storage device. Click Monitor > System Status > USB Storage to display this screen. Figure 130 Monitor > System Status > USB Storage The following table describes the labels in this screen. Table 43 Monitor > System Status > USB Storage LABEL DESCRIPTION Device description This is a basic description of the type of USB device. Usage This field displays how much of the USB storage device's capacity is currently being used out of its total capacity and what percentage that makes. ZyWALL ATP Series User's Guide 150