ZyXEL ZyWALL ATP700 User Guide - Page 810

Chapter 37 System 37.11.5 Add SNMPv3 User Click Add under SNMPv3 in Configuration > System > SNMP to create an SNMPv3 user for authentication with managers using SNMP v3. Use the username and password of the login accounts you specify in this screen to create accounts on the SNMP v3 manager. Figure 558 Configuration > System > SNMP(v3) > Add The following table describes the labels in this screen. Table 341 Configuration > System > SNMP(v3) > Add LABEL DESCRIPTION User Authentication Privacy Specify the username of a login account on the Zyxel Device. The associated password is used in authentication algorithms and encryption methods. Select an authentication algorithm. MD5 (Message Digest 5) and SHA (Secure Hash Algorithm) are hash algorithms used to authenticate SNMP data. SHA authentication is generally considered stronger than MD5, but is slower. Specify the encryption method for SNMP communication from this user. You can choose one of the following: Privilege • DES - Data Encryption Standard is a widely used (but breakable) method of data encryption. It applies a 56-bit key to each 64-bit block of data. • AES - Advanced Encryption Standard is another method for data encryption that also uses a secret key. AES applies a 128-bit key to 128-bit blocks of data. Select the access rights to MIBs. OK Cancel • Read-Write - The associated user can create and edit the MIBs on the Zyxel Device, except the user account. • Read-Only - The associated user can only collect information from the Zyxel Device MIBs. Click OK to save the changes. Click Cancel to begin configuring this screen afresh. 37.11.6 Service Control Rules Click the Add or Edit icon in the Service Control table to add a service control rule. ZyWALL ATP Series User's Guide 810