ZyXEL ZyWALL ATP700 User Guide - Page 355

Chapter 10 Routing Table 138 Configuration > Network > Routing > OSPF > Add (continued) LABEL DESCRIPTION Authentication This is the authentication method the virtual link uses. This authentication protects the integrity, but not the confidentiality, of routing updates. For OSPF, the Zyxel Device supports a default authentication type by area. If you want to use this default in an interface or virtual link, you set the associated Authentication Type field to Same as Area. As a result, you only have to update the authentication information for the area to update the authentication type used by these interfaces and virtual links. Alternatively, you can override the default in any interface or virtual link by selecting a specific authentication method. Please see the respective interface sections for more information. None uses no authentication. Text uses a plain text password that is sent over the network (not very secure). Hover your cursor over this label to display the password. MD5 uses an MD5 password and authentication ID (most secure). Hover your cursor over this label to display the authentication ID and key. OK Cancel Same as Area has the virtual link also use the Authentication settings above. Click OK to save your changes back to the Zyxel Device. Click Cancel to exit this screen without saving. 10.7.3 Virtual Link Add/Edit Screen The Virtual Link Add/Edit screen allows you to create a new virtual link or edit an existing one. When the OSPF add or edit screen (see Section 10.7.2 on page 353) has the Type set to Normal, a Virtual Link table displays. Click either the Add icon or an entry and the Edit icon to display a screen like the following. Figure 246 Configuration > Network > Routing > OSPF > Add > Add ZyWALL ATP Series User's Guide 355