ZyXEL ZyWALL ATP700 User Guide - Page 868

Chapter 40 Diagnostics 40.8 The Wireless Frame Capture Screen Use this screen to capture wireless network traffic going through the AP interfaces connected to your Zyxel Device. Studying these frame captures may help you identify network problems. Click Maintenance > Diagnostics > Wireless Frame Capture to display this screen. Note: New capture files overwrite existing files of the same name. Change the File Prefix field's setting to avoid this. Figure 604 Maintenance > Diagnostics > Wireless Frame Capture > Capture The following table describes the labels in this screen. Table 373 Maintenance > Diagnostics > Wireless Frame Capture > Capture LABEL DESCRIPTION MON Mode APs Configure AP to MON Mode Available MON Mode APs Click this to go the Configuration > Wireless > AP Management screen, where you can set one or more APs to monitor mode. This column displays which APs on your wireless network are currently configured for monitor mode. Capture MON Mode APs Misc Setting File Size Use the arrow buttons to move APs off this list and onto the Captured MON Mode APs list. This column displays the monitor-mode configured APs selected to for wireless frame capture. Specify a maximum size limit in kilobytes for the total combined size of all the capture files on the Zyxel Device, including any existing capture files and any new capture files you generate. Note: If you have existing capture files you may need to set this size larger or delete existing capture files. The valid range is 1 to 50000. The Zyxel Device stops the capture and generates the capture file when either the file reaches this size. ZyWALL ATP Series User's Guide 868