ZyXEL ZyWALL ATP700 User Guide - Page 313
Client, References, Server, Relay
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
Chapter 9 Interfaces Table 119 Configuration > Network > Interface > Bridge > Add / Edit (continued) LABEL DESCRIPTION Customized DUID If you want to use a customized DUID, enter it here for the interface. Enable Rapid Commit Select this to shorten the DHCPv6 message exchange process from four to two steps. This function helps reduce heavy network traffic load. Information Refresh Time Request Address DHCPv6 Request Options / DHCPv6 Lease Options Add Edit Remove References # Name Type Value Interface Relay Server IPv6 Router Advertisement Setting Enable Router Advertisement Advertised Hosts Get Network Configuration From DHCPv6 Advertised Hosts Get Other Configuration From DHCPv6 Note: Make sure you also enable this option in the DHCPv6 clients to make rapid commit work. Enter the number of seconds a DHCPv6 client should wait before refreshing information retrieved from DHCPv6. This field is available if you set this interface to DHCPv6 Client. Select this to get an IPv6 IP address for this interface from the DHCP server. Clear this to not get any IP address information through DHCPv6. If this interface is a DHCPv6 client, use this section to configure DHCPv6 request settings that determine what additional information to get from the DHCPv6 server. If the interface is a DHCPv6 server, use this section to configure DHCPv6 lease settings that determine what to offer to the DHCPv6 clients. Click this to create an entry in this table. See Section 9.4.5 on page 266 for more information. Select an entry and click this to change the settings. Select an entry and click this to delete it from this table. Select an entry and click References to open a screen that shows which settings use the entry. See Section 9.4.4 on page 265 for an example. This field is a sequential value, and it is not associated with any entry. This field displays the name of the DHCPv6 request or lease object. This field displays the type of the object. This field displays the IPv6 prefix that the Zyxel Device obtained from an uplink router (Server is selected) or will advertise to its clients (Client is selected). When Relay is selected, select this check box and an interface from the drop-down list if you want to use it as the relay server. When Relay is selected, select this check box and enter the IP address of a DHCPv6 server as the relay server. Select this to enable this interface to send router advertisement messages periodically. See IPv6 Router Advertisement on page 242 for more information. Select this to have the Zyxel Device indicate to hosts to obtain network settings (such as prefix and DNS settings) through DHCPv6. Clear this to have the Zyxel Device indicate to hosts that DHCPv6 is not available and they should use the prefix in the router advertisement message. Select this to have the Zyxel Device indicate to hosts to obtain DNS information through DHCPv6. Clear this to have the Zyxel Device indicate to hosts that DNS information is not available in this network. ZyWALL ATP Series User's Guide 313