ZyXEL ZyWALL ATP700 User Guide - Page 261
DHCP Server, IP Pool Start Address, Pool Size, BiDir, In-Only, Out-Only, and 2
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Chapter 9 Interfaces Table 100 Configuration > Network > Interface > Ethernet > Edit (continued) LABEL DESCRIPTION PXE Server PXE (Preboot eXecution Environment) allows a client computer to use the network to boot up and install an operating system via a PXE-capable Network Interface Card (NIC). PXE is available for computers on internal interfaces to allow them to boot up using boot software on a PXE server. The Zyxel Device acts as an intermediary between the PXE server and the computers that need boot software. PXE Boot Loader File Enable IP/MAC Binding Enable Logs for IP/MAC Binding Violation Static DHCP Table Add Edit Remove # IP Address MAC Description RIP Setting Enable RIP Direction The PXE server must have a public IPv4 address. You must enable DHCP Server on the Zyxel Device so that it can receive information from the PXE server. A boot loader is a computer program that loads the operating system for the computer. Type the exact file name of the boot loader software file, including filename extension, that is on the PXE server. If the wrong filename is typed, then the client computers cannot boot. Select this option to have this interface enforce links between specific IP addresses and specific MAC addresses. This stops anyone else from manually using a bound IP address on another device connected to this interface. Use this to make use only the intended users get to use specific IP addresses. Select this option to have the Zyxel Device generate a log if a device connected to this interface attempts to use an IP address that is bound to another device's MAC address. Configure a list of static IP addresses the Zyxel Device assigns to computers connected to the interface. Otherwise, the Zyxel Device assigns an IP address dynamically using the interface's IP Pool Start Address and Pool Size. Click this to create a new entry. Select an entry and click this to be able to modify it. Select an entry and click this to delete it. This field is a sequential value, and it is not associated with a specific entry. Enter the IP address to assign to a device with this entry's MAC address. Enter the MAC address to which to assign this entry's IP address. Enter a description to help identify this static DHCP entry. You can use alphanumeric and characters, and it can be up to 60 characters long. See Section 10.6 on page 347 for more information about RIP. Select this to enable RIP in this interface. This field is effective when RIP is enabled. Select the RIP direction from the drop-down list box. BiDir - This interface sends and receives routing information. In-Only - This interface receives routing information. Send Version Receive Version V2-Broadcast OSPF Setting Area Priority Link Cost Out-Only - This interface sends routing information. This field is effective when RIP is enabled. Select the RIP version(s) used for sending RIP packets. Choices are 1, 2, and 1 and 2. This field is effective when RIP is enabled. Select the RIP version(s) used for receiving RIP packets. Choices are 1, 2, and 1 and 2. This field is effective when RIP is enabled. Select this to send RIP-2 packets using subnet broadcasting; otherwise, the Zyxel Device uses multicasting. See Section 10.7 on page 349 for more information about OSPF. Select the area in which this interface belongs. Select None to disable OSPF in this interface. Enter the priority (between 0 and 255) of this interface when the area is looking for a Designated Router (DR) or Backup Designated Router (BDR). The highest-priority interface identifies the DR, and the second-highest-priority interface identifies the BDR. Set the priority to zero if the interface can not be the DR or BDR. Enter the cost (between 1 and 65,535) to route packets through this interface. ZyWALL ATP Series User's Guide 261