ZyXEL ZyWALL ATP700 User Guide - Page 812

Chapter 37 System Figure 560 Configuration > System > Auth. Server The following table describes the labels in this screen. Table 343 Configuration > System > Auth. Server LABEL DESCRIPTION Enable Authentication Server Select the check box to have the Zyxel Device act as a RADIUS server. Authentication Select the certificate whose corresponding private key is to be used to identify the Zyxel Device Server Certificate to the RADIUS client. You must have certificates already configured in the My Certificates screen. Authentication Method Select an authentication method if you have created any in the Configuration > Object > Auth. Method screen. Trusted Client Use this section to configure trusted clients in the Zyxel Device RADIUS server database. Add Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. Activate To turn on an entry, select it and click Activate. Inactivate To turn off an entry, select it and click Inactivate. # This is the index number of the entry. Status This icon is lit when the entry is active and dimmed when the entry is inactive. Profile Name This field indicates the name assigned to the profile. IP Address This is the IP address of the RADIUS client that is allowed to exchange messages with the Zyxel Device. Mask This is the subnet mask of the RADIUS client. Description This is the description of the RADIUS client. Apply Click Apply to save your changes back to the Zyxel Device. Reset Click Reset to return the screen to its last-saved settings. ZyWALL ATP Series User's Guide 812