ZyXEL ZyWALL ATP700 User Guide - Page 859

Figure 597 Maintenance > Diagnostics > Packet Capture > Capture on AP The following table describes the labels in this screen. Table 367 Maintenance > Diagnostics > Packet Capture > Capture on AP LABEL DESCRIPTION Select on AP This lists the managed APs that are connected and available. Select the managed AP that you want the Zyxel Device to capture network traffic going through it. Query After you select an AP, click this button to update and display the interfaces, filter configuration and storage size available for the selected AP on the screen. Capture Status Interfaces Note: You need to use the Query button before packet capturing on an AP if the AP has rebooted or the applied AP profile settings have been changed. This shows Standby when the Zyxel Device is ready to or have finished capturing network traffic going through the selected AP's interface(s). This shows Preparing when the Zyxel Device is sending the capture command to the AP's interface(s). This shows Capturing when the AP is capturing network traffic going through the selected AP's interface(s). This shows File Receiving when the Zyxel Device starts to receive capture files from the AP's interface(s) after you press the Stop button. Enabled interfaces (except for virtual interfaces) appear under Available Interfaces. Select interfaces for which to capture packets and click the right arrow button to move them to the Capture Interfaces list. Use the [Shift] and/or [Ctrl] key to select multiple objects. ZyWALL ATP Series User's Guide 859