ZyXEL ZyWALL ATP700 User Guide - Page 821
ZON Utility Fields
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 821 highlights
Chapter 37 System Table 349 ZON Utility Icons ICON DESCRIPTION 3 Reboot Device Use this icon to restart the selected device(s). This may be useful when troubleshooting or upgrading new firmware. 4 Reset Configuration to Default 5 Locator LED If you forget your password or cannot access the Web Configurator, you can use this icon to reload the factory-default configuration file. This means that you will lose all configurations that you had previously. Use this icon to locate the selected device by causing its Locator LED to blink. 6 Web GUI Use this to access the selected device web configurator from your browser. You will need a username and password to log in. 7 Firmware Upgrade Use this icon to upgrade new firmware to selected device(s) of the same model. Make sure you have downloaded the firmware from the Zyxel website to your computer and unzipped it in advance. If your Zyxel Device supports dual firmware images, the standby image will be upgraded. After the new firmware is uploaded, you Zyxel Device will reboot, and the new firmware will be the running firmware. 8 Change Password Use this icon to change the admin password of the selected device. You must know the current admin password before changing to a new one. 9 Configure NCC Discovery You must have Internet access to use this feature. Use this icon to enable or disable the Nebula Control Center (NCC) discovery feature on the selected device. If it's enabled, the selected device will try to connect to the NCC. Once the selected device is connected to and has registered in the NCC, it'll go into the cloud management mode. 10 ZAC 11 Clear and Rescan Use this icon to run the Zyxel AP Configurator of the selected AP. Use this icon to clear the list and discover all devices on the connected network again. 12 Save Configuration Use this icon to save configuration changes to permanent memory on a selected device. 13 Settings Use this icon to select a network adaptor for the computer on which the ZON utility is installed, and the utility language. The following table describes the fields in the ZON Utility main screen. Table 350 ZON Utility Fields LABEL DESCRIPTION Type This field displays an icon of the kind of device discovered. Model This field displays the model name of the discovered device. Firmware Version This field displays the firmware version of the discovered device. MAC Address This field displays the MAC address of the discovered device. IP Address This field displays the IP address of an internal interface on the discovered device that first received an ZDP discovery request from the ZON utility. System Name This field displays the system name of the discovered device. Location This field displays where the discovered device is. Status This field displays whether changes to the discovered device have been done successfully. As the Zyxel Device does not support IP Configuration, Renew IP address and Flash Locator LED, this field displays "Update failed", "Not support Renew IP address" and "Not support Flash Locator LED" respectively. NCC Discovery This field displays if the discovered device supports the Nebula Control Center (NCC) discovery feature. If it's enabled, the selected device will try to connect to the NCC. Once the selected device is connected to and has registered in the NCC, it'll go into the cloud management mode. ZyWALL ATP Series User's Guide 821