ZyXEL ZyWALL ATP700 User Guide - Page 803

Chapter 37 System 37.9.2 Service Control Rules Click the Add or Edit icon in the Service Control table to add a service control rule. Figure 553 Configuration > System > TELNET > Service Control Rule Add/Edit The following table describes the labels in this screen. Table 336 Configuration > System > TELNET > Service Control Rule Add/Edit LABEL DESCRIPTION Create new Object Address Object Use this to configure any new settings objects that you need to use in this screen. Select ALL to allow or deny any computer to communicate with the Zyxel Device using Telnet. Zone Select a predefined address object to just allow or deny the computer with the IP address that you specified to access the Zyxel Device using Telnet. Select ALL to allow or prevent any Zyxel Device zones from being accessed using Telnet. Action Select a predefined Zyxel Device zone on which a incoming service is allowed or denied. Select Accept to allow the user to access the Zyxel Device from the specified computers. OK Cancel Select Deny to block the user's access to the Zyxel Device from the specified computers. Click OK to save your customized settings and exit this screen. Click Cancel to exit this screen without saving. 37.10 FTP You can upload and download the Zyxel Device's firmware and configuration files using FTP. To use this feature, your computer must have an FTP client. 37.10.1 Configuring FTP To change your Zyxel Device's FTP settings, click Configuration > System > FTP tab. The screen appears as shown. Use this screen to specify from which zones FTP can be used to access the Zyxel Device. You can also specify from which IP addresses the access can come. ZyWALL ATP Series User's Guide 803