ZyXEL ZyWALL ATP700 User Guide - Page 690
Address Group Summary Screen
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 690 highlights
Chapter 34 Object Table 278 Configuration > Object > Address/GeoIP > Address > Add/Edit (IPv6) LABEL DESCRIPTION IPv6 Starting Address This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the beginning of the range of IP addresses that this address object represents. IPv6 Ending Address This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the end of the range of IP address that this address object represents. IPv6 Address Prefix This field is only available if the Address Type is SUBNET. This field cannot be blank. Enter the IPv6 address prefix that the Zyxel Device uses for the LAN IPv6 address. Interface If you selected INTERFACE IP, INTERFACE SUBNET, or INTERFACE GATEWAY as the Address Type, use this field to select the interface of the network that this address object represents. IPv6 Address Type Select whether the IPv6 address is a link-local IP address (LINK LOCAL), static IP address (STATIC), an IPv6 StateLess Address Auto Configuration IP address (SLAAC), or is obtained from a DHCPv6 server (DHCPv6). Region If you selected Geography as the Address Type, use this field to select a country or continent. FQDN If you selected FQDN as the Address Type, use this field to enter a fully qualified domain name. OK Click OK to save your changes back to the Zyxel Device. Cancel Click Cancel to exit this screen without saving your changes. 34.6.3 Address Group Summary Screen The Address Group screen provides a summary of all address groups. To access this screen, click Configuration > Object > Address/Geo IP > Address Group. Click a column's heading cell to sort the table entries by that column's criteria. Click the heading cell again to reverse the sort order. Figure 456 Configuration > Object > Address/Geo IP > Address Group The following table describes the labels in this screen. See Section 34.6.3.1 on page 691 for more information as well. Table 279 Configuration > Object > Address/Geo IP > Address Group LABEL DESCRIPTION IPv4 Address Group Configuration Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it before doing so. References Select an entry and click References to open a screen that shows which settings use the entry. # This field is a sequential value, and it is not associated with a specific address group. Name This field displays the name of each address group. ZyWALL ATP Series User's Guide 690