ZyXEL ZyWALL ATP700 User Guide - Page 391
Turning on UPnP in Windows 7 Example
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 391 highlights
Chapter 15 UPnP The following table describes the fields in this screen. Table 151 Configuration > Network > UPnP LABEL DESCRIPTION Enable UPnP Enable NAT-PMP Select this check box to activate UPnP on the Zyxel Device. Be aware that anyone could use a UPnP application to open the web configurator's login screen without entering the Zyxel Device's IP address (although you must still enter the password to access the web configurator). NAT Port Mapping Protocol (NAT-PMP) automates port forwarding to allow a computer in a private network (behind the Zyxel Device) to automatically configure the Zyxel Device to allow computers outside the private network to contact it. Allow UPnP or NAT-PMP to pass through Firewall Outgoing WAN Interface Support LAN List Select this check box to activate NAT-PMP on the Zyxel Device. Be aware that anyone could use a NAT-PMP application to open the web configurator's login screen without entering the Zyxel Device's IP address (although you must still enter the password to access the web configurator). Select this check box to allow traffic from UPnP-enabled or NAT-PMP-enabled applications to bypass the security policy. Clear this check box to have the security policy block all UPnP or NAT-PMP application packets (for example, MSN packets). Select through which WAN interface(s) you want to send out traffic from UPnP-enabled or NAT-PMP-enabled applications. If the WAN interface you select loses its connection, the Zyxel Device attempts to use the other WAN interface. If the other WAN interface also does not work, the Zyxel Device drops outgoing packets from UPnP-enabled or NAT-PMP-enabled applications. The Available list displays the name(s) of the internal interface(s) on which the Zyxel Device supports UPnP and/or NAT-PMP. Apply Reset To enable UPnP and/or NAT-PMP on an interface, you can double-click a single entry to move it or use the [Shift] or [Ctrl] key to select multiple entries and click the right arrow button to add to the Member list. To remove an interface, select the name(s) in the Member list and click the left arrow button. Click Apply to save your changes back to the Zyxel Device. Click Reset to return the screen to its last-saved settings. 15.4 Technical Reference The sections show examples of using UPnP. 15.4.1 Turning on UPnP in Windows 7 Example This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7. Activate UPnP on the Zyxel Device. Make sure the computer is connected to a LAN port of the Zyxel Device. Turn on your computer and the Zyxel Device. 1 Click the start icon, Control Panel and then the Network and Sharing Center. ZyWALL ATP Series User's Guide 391