ZyXEL ZyWALL ATP700 User Guide - Page 688
IPv4 Address Add/Edit Screen
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 688 highlights
Chapter 34 Object Table 276 Configuration > Object > Address/Geo IP > Address (continued) LABEL DESCRIPTION Reference This displays the number of times an object reference is used in a profile. IPv6 Address Configuration Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to be able to modify the entry's settings. Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it before doing so. References Select an entry and click References to open a screen that shows which settings use the entry. # This field is a sequential value, and it is not associated with a specific address. Name This field displays the configured name of each address object. Type This field displays the type of each address object. "INTERFACE" means the object uses the settings of one of the Zyxel Device's interfaces. IPv6 Address This field displays the IPv6 addresses represented by each address object. If the object's settings are based on one of the Zyxel Device's interfaces, the name of the interface displays first followed by the object's current address settings. Reference This displays the number of times an object reference is used in a profile. 34.6.2.1 IPv4 Address Add/Edit Screen The Configuration > Object > Address/GeoIP > Address > Add/Edit (IPv4) screen allows you to create a new address or edit an existing one. To access this screen, go to the Address screen (see Section 34.6.2 on page 686), and click either the Add icon or an Edit icon in the IPv4 Address Configuration section. Figure 454 Configuration > Object > Address/GeoIP > Address > Add/Edit (IPv4) t The following table describes the labels in this screen. Table 277 Configuration > Object > Address/GeoIP > Address > Add/Edit (IPv4) LABEL DESCRIPTION Name Type the name used to refer to the address. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case- sensitive. Address Type Select the type of address you want to create. IP Address Starting IP Address Note: The Zyxel Device automatically updates address objects that are based on an interface's IP address, subnet, or gateway if the interface's IP address settings change. For example, if you change 1's IP address, the Zyxel Device automatically updates the corresponding interface-based, LAN subnet address object. This field is only available if the Address Type is HOST. This field cannot be blank. Enter the IP address that this address object represents. This field is only available if the Address Type is RANGE. This field cannot be blank. Enter the beginning of the range of IP addresses that this address object represents. ZyWALL ATP Series User's Guide 688