ZyXEL ZyWALL ATP700 User Guide - Page 805

Chapter 37 System Table 337 Configuration > System > FTP (continued) LABEL DESCRIPTION Apply Click Apply to save your changes back to the Zyxel Device. Reset Click Reset to return the screen to its last-saved settings. 37.10.2 Service Control Rules Click the Add or Edit icon in the Service Control table to add a service control rule. Figure 555 Configuration > System > FTP > Service Control Rule Add/Edit The following table describes the labels in this screen. Table 338 Configuration > System > FTP > Service Control Rule Add/Edit LABEL DESCRIPTION Create new Object Address Object Use this to configure any new settings objects that you need to use in this screen. Select ALL to allow or deny any computer to communicate with the Zyxel Device using FTP. Zone Select a predefined address object to just allow or deny the computer with the IP address that you specified to access the Zyxel Device using FTP. Select ALL to allow or prevent any Zyxel Device zones from being accessed using FTP. Action Select a predefined Zyxel Device zone on which a incoming service is allowed or denied. Select Accept to allow the user to access the Zyxel Device from the specified computers. OK Cancel Select Deny to block the user's access to the Zyxel Device from the specified computers. Click OK to save your customized settings and exit this screen. Click Cancel to exit this screen without saving. 37.11 SNMP Simple Network Management Protocol is a protocol used for exchanging management information between network devices. Your Zyxel Device supports SNMP agent functionality, which allows a manager station to manage and monitor the Zyxel Device through the network. The Zyxel Device supports SNMP version one (SNMPv1), version two (SNMPv2c) and version 3 (SNMPv3). The next figure illustrates an SNMP management operation. ZyWALL ATP Series User's Guide 805