ZyXEL ZyWALL ATP700 User Guide - Page 316
infinite, days, hours, and minutes, DHCP server, DHCP Server, IP Pool Start Address, Pool Size
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Chapter 9 Interfaces Table 119 Configuration > Network > Interface > Bridge > Add / Edit (continued) LABEL DESCRIPTION Lease time Specify how long each computer can use the information (especially the IP address) before it has to request the information again. Choices are: infinite - select this if IP addresses never expire Extended Options Add Edit Remove # Name Code Type Value PXE Server days, hours, and minutes - select this to enter how long IP addresses are valid. This table is available if you selected DHCP server. Configure this table if you want to send more information to DHCP clients through DHCP packets. Click this to create an entry in this table. See Section 9.4.6 on page 267. Select an entry in this table and click this to modify it. Select an entry in this table and click this to delete it. This field is a sequential value, and it is not associated with any entry. This is the option's name. This is the option's code number. This is the option's type. This is the option's value. PXE (Preboot eXecution Environment) allows a client computer to use the network to boot up and install an operating system via a PXE-capable Network Interface Card (NIC). PXE is available for computers on internal interfaces to allow them to boot up using boot software on a PXE server. The Zyxel Device acts as an intermediary between the PXE server and the computers that need boot software. PXE Boot Loader File Enable IP/MAC Binding Enable Logs for IP/MAC Binding Violation Static DHCP Table Add Edit Remove # IP Address MAC Address Description The PXE server must have a public IPv4 address. You must enable DHCP Server on the Zyxel Device so that it can receive information from the PXE server. A boot loader is a computer program that loads the operating system for the computer. Type the exact file name of the boot loader software file, including filename extension, that is on the PXE server. If the wrong filename is typed, then the client computers cannot boot. Select this option to have this interface enforce links between specific IP addresses and specific MAC addresses. This stops anyone else from manually using a bound IP address on another device connected to this interface. Use this to make use only the intended users get to use specific IP addresses. Select this option to have the Zyxel Device generate a log if a device connected to this interface attempts to use an IP address that is bound to another device's MAC address. Configure a list of static IP addresses the Zyxel Device assigns to computers connected to the interface. Otherwise, the Zyxel Device assigns an IP address dynamically using the interface's IP Pool Start Address and Pool Size. Click this to create a new entry. Select an entry and click this to be able to modify it. Select an entry and click this to delete it. This field is a sequential value, and it is not associated with a specific entry. Enter the IP address to assign to a device with this entry's MAC address. Enter the MAC address to which to assign this entry's IP address. Enter a description to help identify this static DHCP entry. You can use alphanumeric and characters, and it can be up to 60 characters long. ZyWALL ATP Series User's Guide 316