ZyXEL ZyWALL ATP700 User Guide - Page 161
Monitor > Wireless > AP Information > AP List > Config AP
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Chapter 6 Monitor Each field is described in the following table. Table 49 Monitor > Wireless > AP Information > AP List > Config AP LABEL DESCRIPTION Create new Object MAC Model Description Group Setting Radio 1/2 Setting Override Group Radio Setting Radio 1/2 OP Mode Use this menu to create a new Radio Profile object to associate with this AP. This displays the MAC address of the selected AP. This field displays the AP's hardware model information. It displays N/A (not applicable) only when the AP disconnects from the Zyxel Device and the information is unavailable as a result. Enter a description for this AP. You can use up to 31 characters, spaces and underscores allowed. Select an AP group to which you want this AP to belong. Select this option to overwrite the AP radio settings with the settings you configure here. Select the operating mode for radio 1 or radio 2. AP Mode means the AP can receive connections from wireless clients and pass their data traffic through to the Zyxel Device to be managed (or subsequently passed on to an upstream gateway for managing). Radio 1/2 Profile Override Group Output Power Setting Output Power Override Group SSID Setting Edit # SSID Profile Override Group VLAN Setting Force Overwrite VLAN Config Management VLAN ID As Native VLAN Suppression On MON Mode means the AP monitors the broadcast area for other APs, then passes their information on to the Zyxel Device where it can be determined if those APs are friendly or rogue. If an AP is set to this mode it cannot receive connections from wireless clients. Select a profile from the list. If no profile exists, you can create a new one through the Create new Object menu. Select this option to overwrite the AP output power setting with the setting you configure here. Set the output power of the AP. Select this option to overwrite the AP SSID profile setting with the setting you configure here. This section allows you to associate an SSID profile with the radio. Select an SSID and click this button to reassign it. The selected SSID becomes editable immediately upon clicking. This is the index number of the SSID profile. You can associate up to eight SSID profiles with an AP radio. Indicates which SSID profile is associated with this radio profile. Select this option to overwrite the AP VLAN setting with the setting you configure here. Select this to have the Zyxel Device change the AP's management VLAN to match the configuration in this screen. Enter a VLAN ID for this AP. Select this option to treat this VLAN ID as a VLAN created on the Zyxel Device and not one assigned to it from outside the network. Select this option to enable the AP's LED suppression mode. All the LEDs of the AP will turn off after the AP is ready. OK Cancel If the check box is unchecked, it means the LEDs will stay lit after the AP is ready. Click OK to save your changes back to the Zyxel Device. Click Cancel to close the window with changes unsaved. ZyWALL ATP Series User's Guide 161