ZyXEL ZyWALL ATP700 User Guide - Page 802
System, ZyWALL ATP Series User's Guide, Configuration > System > TELNET,
View all ZyXEL ZyWALL ATP700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 802 highlights
Chapter 37 System Figure 552 Configuration > System > TELNET The following table describes the labels in this screen. Table 335 Configuration > System > TELNET LABEL DESCRIPTION Enable Server Port Service Control Add Edit Remove Move # Select the check box to allow or disallow the computer with the IP address that matches the IP address(es) in the Service Control table to access the Zyxel Device CLI using this service. You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. This specifies from which computers you can access which Zyxel Device zones. Click this to create a new entry. Select an entry and click Add to create a new entry after the selected entry. Refer to Table 331 on page 784 for details on the screen that opens. Double-click an entry or select it and click Edit to be able to modify the entry's settings. To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it before doing so. Note that subsequent entries move up by one when you take this action. To change an entry's position in the numbered list, select the method and click Move to display a field to type a number for where you want to put it and press [ENTER] to move the rule to the number that you typed. This the index number of the service control rule. Zone Address Action Apply Reset The entry with a hyphen (-) instead of a number is the Zyxel Device's (non-configurable) default policy. The Zyxel Device applies this to traffic that does not match any other configured rule. It is not an editable rule. To apply other behavior, configure a rule that traffic will match so the Zyxel Device will not have to use the default policy. This is the zone on the Zyxel Device the user is allowed or denied to access. This is the object name of the IP address(es) with which the computer is allowed or denied to access. This displays whether the computer with the IP address specified above can access the Zyxel Device zone(s) configured in the Zone field (Accept) or not (Deny). Click Apply to save your changes back to the Zyxel Device. Click Reset to return the screen to its last-saved settings. ZyWALL ATP Series User's Guide 802