ZyXEL ZyWALL ATP700 User Guide - Page 217

Chapter 8 Wireless 8.4 AP Management Screens Use these screens to manage all of the APs connected to the Zyxel Device. Click Configuration > Wireless > AP Management to access these screens. Click on the icon to go to the OneSecurity website where there is guidance on configuration walkthroughs and other information. 8.4.1 Mgnt. AP List Figure 179 Configuration > Wireless > AP Management > Mgnt. AP List Each field is described in the following table. Table 84 Configuration > Wireless > AP Management > Mgnt. AP List LABEL DESCRIPTION Filter AP List Click Show Advanced Settings to reveal Filter fields where you can display managed APs by status, keyword or those managed by the Nebula portal. Select the type of APs you want to display. Select All to show all kinds of APs that are currently or used to be connected to the Zyxel Device. Status Keyword Search Select NebulaFlexPRO to show the APs that can work in Nebula cloud management mode. Select the status of APs you want to display. Enter a keyword to display the APs that include it in their AP information, such as model number, firmware version, MAC address and so on. This field is case-sensitive. Click this to update the list of APs based on the search criteria. Reset Enable Column Freeze Edit the selected rule Add to Mgmt AP List Your search criteria is retained when navigating between screens. Click this to return the search criteria to the factory defaults and display all currently or previously connected APs without a filter. Select this to lock the index columns in place while scrolling to the right. Select an AP and click this to change the selected AP's properties, such as its group, radio, VLAN and port settings. Select an AP and click this to add the selected AP to the managed AP list. ZyWALL ATP Series User's Guide 217