ZyXEL ZyWALL ATP700 User Guide - Page 224

Chapter 8 Wireless Each field is described in the following table. Table 87 Configuration > Wireless > AP Management > AP Group LABEL DESCRIPTION Group Setting Default Group Select a group that is used as the default group. Any AP that is not configured to associate with a specific AP group belongs to the default group automatically. Group Summary Add Click this button to create a new AP group. Edit Select an entry and click this button to edit its properties. Remove Select an entry and click this button to remove it from the list. DCS Now Note: You cannot remove a group with which an AP is associated. Select one or multiple groups and click this button to use DCS (Dynamic Channel Selection) to allow the APs in the group(s) to automatically find a less-used channel in an environment where there are many APs and there may be interference. Note: You should have enabled DCS in the applied AP radio profile before the APs can use DCS. # Group Name Member Count Apply Reset Note: DCS is not supported on the radio which is working in repeater AP mode. This is the index number of the group in the list. This is the name of the group. This is the total number of APs which belong to this group. Click Apply to save your changes back to the Zyxel Device. Click Reset to return the screen to its last-saved settings. ZyWALL ATP Series User's Guide 224