Alpine IVA D106 Owner's Manual - Page 41

Setting the Rear Camera Input With a rear camera connected, rear view video is output to the monitor. Setting item: CAMERA IN Setting contents: OFF / ON OFF: The CAMERA source is not displayed on the VISUAL selection screen. ON: Even if the shift lever is not set to reverse (R), the rear pictures are output by selecting the CAMERA source. • By shifting to reverse (R), the rear pictures are output. This function is effective when the reverse wire is properly connected. • To apply the setting, set to VISUAL "Setting the VISUAL Button" (page 39). Setting the AUX Mode Setting item: AUX IN Setting content: OFF / ON / CAMERA / DVD / GAME / TV / EXT. DVD / NAV. OFF: AUX source is not displayed. ON: AUX source is displayed. • OFF is not displayed when the optional DVD player or DVD changer is connected. During SYSTEM set up, although the AUX name can be changed, it is not displayed on the SOURCE selection screen. • When OFF is selected, the settings related to AUX cannot be changed from this unit. • The selected name is displayed on the VISUAL and REAR selection screen. • Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit. • The selected source name is displayed instead of AUX source name. Select SOURCE to switch to the guide function of each mode. • If an optional Back-up camera is used by connecting to the AUX/ CAMERA IN Connector (Yellow) of the unit, make the "CAMERA" setting. (Refer to "Connecting Video compatible iPod and Back-up Camera at the same time" on page 85.) • When ON is set in "Setting the Rear Camera Input" (page 39) and "VIDEO" is set in "Setting for iPod Connection" (page 38), "CAMERA" is displayed. Adjusting the External Input Audio Level After setting to ON in "Setting the AUX Mode," this setting can be carried out. Setting item: AUX IN LEVEL Setting content: LOW / HIGH LOW: Decreases the external input audio level HIGH: Increases the external input audio level Setting the Picture/Sound Output Outputs the picture/sound of the source selected on the IVA-D106 connected to the rear monitor. Setting item: AUX OUT Setting content: OFF / ON ON: The "REAR" item is displayed on the SOURCE selection screen. Touch [REAR] to change to the REAR selection screen, and then touch the desired source. The selected source picture is output on the rear monitor. OFF: The "REAR" item is not displayed on the SOURCE select screen. Setting the Bluetooth Connection (Bluetooth IN) Setting item: BLUETOOTH IN Setting contents: OFF / NAV. / ADAPTER OFF: NAV.: ADAPTER: Select to ignore any external interrupts. select when an optional Portable Navigation is connected. Change voice line to RCA when TEL rings. Select when an optional Bluetooth box is connected. When external interruption occurs, the display changes to the TEL screen. A source name of TEL on the SOURCE selection screen is displayed. • For details on Bluetooth operation, refer to the Owner's Manual of the Bluetooth Box. • If a Bluetooth Box compatible with the Voice-Dial function is connected, the Voice-Dial function can be used. Setting the USB Adapter to ON/OFF If a USB Adapter is to be used, set to ON. Setting item: USB ADAPTER Setting content: OFF / ON OFF: Does not display the USB source name on the SOURCE select screen. ON: Displays the USB source name on the SOURCE select screen. • If ON is set even when a CD changer is connected, the source name on the SOURCE select screen will change from CD CHG to USB. Setting the VISUAL Button Setting item: VISUAL KEY Setting content: VISUAL / NAV. NAV.: Switches directly to the navigation screen by touching [VISUAL] on the main source screen or pressing VISUAL on the unit. (Only when an Alpine optional RGB Navigation is connected.) VISUAL: Recalls the VISUAL Selection screen by touching [VISUAL] on the main source screen or pressing VISUAL on the unit. Setting the Digital Output To connect an audio processor using the optical digital output, set to "ON" by the following procedure. Setting item: OPTICAL OUT Setting contents: OFF / ON • Afterwards, set ACC to OFF once, then turn it ON again. The setting of Digital Output is decided. Setting the AUX+ Level The setting is made if AUX+ is selected in "Setting for iPod Connection" (page 38). Setting item: AUX+ LEVEL Setting contents: LOW / HIGH LOW: Decreases the external input audio level. HIGH: Increases the external input audio level. 39-EN