Alpine IVA D106 Owner's Manual - Page 48
Graphic Equalizer Adjustments, Equalizer Presets (Factory’s EQ), Select L+R by touching
UPC - 793276200594
View all Alpine IVA D106 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Graphic Equalizer Adjustments The 7 Band graphic equalizer is adjustable. Setting item : G-EQ 1 Select L+R by touching [ ] of G-EQ. L+R: Sets the same adjustment values for the left and right channels. When parametric EQ is adjusted, this setting will be turned OFF. 2 Touch [ ] of G-EQ. The G-EQ list screen appears. 3 Adjust the G-EQ to your preference. Selecting the Band Setting contents: BAND 1 to 7 Touch [ ] or [ ] of BAND. Select the desired band. Adjusting the Level Setting contents: -6 dB to +6 dB Touch [ ] or [ ] of the desired frequency to adjust the level. • When graphic EQ is adjusted, the adjustment for parametric EQ becomes ineffective. Parametric Equalizer Adjustments The frequency bands of the graphic equalizer are fixed. This makes it very difficult to correct for undesired peaks and dips at specific frequencies. The parametric equalizer's center frequency can be tuned to these specific frequencies. Then, the bandwidth (Q) and level are fine-tuned, independently, to make the necessary corrections. The parametric equalizer function is an advanced tool for serious audiophiles. Setting item : P-EQ 1 Select L+R by touching [ ] of P-EQ. L+R: Sets the same adjustment values for the left and right channels. When graphic EQ is adjusted, this setting will be turned OFF. 2 Touch [ ] of P-EQ. The P-EQ list screen appears. 3 Adjust the P-EQ to your preference. Selecting the Band Setting contents: BAND 1 to 5 Touch [ ] or [ ] of BAND. Select the desired band. Adjusting the Frequency Setting contents: BAND 1: 20 Hz~80 Hz BAND 2: 50 Hz~200 Hz BAND 3: 125 Hz~3.2 kHz BAND 4: 315 Hz~8 kHz BAND 5: 800 Hz~20 kHz Touch [ ] or [ ] of FREQ., then adjust the frequency of the selected band. Adjusting the Level Setting contents: -6 dB to +6 dB Touch [ ] or [ ] of LEVEL, then adjust the level of the selected band. Setting the Bandwidth Setting contents: 1/1.5/3 Touch [ ] or [ ] of Q. Select the bandwidth. • When the parametric EQ is adjusted, the adjustment for graphic EQ becomes ineffective. • The frequencies of adjacent bands cannot be adjusted within 4 steps. • While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers. Equalizer Presets (Factory's EQ) 10 typical equalizer settings are preset at the factory for a variety of musical source material. Setting contents: F-EQ 1 Touch [ ] of F-EQ. The F-EQ list screen appears. 2 Set to ON by touching [ ] or [ equalizer characteristic. ] of the desired FLAT / POPS / ROCK / NEWS / JAZZ & BLUES / ELECTRICAL DANCE / HIP HOP & RAP / EASY LISTENING / COUNTRY / CLASSICAL / USER 1~6 • By selecting USER 1 to 6, you can recall the stored preset number in "Graphic Equalizer Adjustments" or "Parametric Equalizer Adjustment". 46-EN