Alpine IVA D106 Owner's Manual - Page 53

Setting the External Audio Processor Following Steps 1 to 5 describe the common procedures for operating the Audio Processor setting function. For details of the setting function items, refer to descriptions of respective items. 1 Check the Defeat mode is off (page 28), and then touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 2 Touch [ ] of AUDIO SETUP. The AUDIO setup screen appears. 3 Touch [ ] of A.PROCESSOR. The A.PROCESSOR list screen appears. 4 Touch [ ], [ ] or [ ] of the desired item to change its setting. Setting items : MEDIA XPANDER / BASS SOUND CONT. / DOLBY PLII/ REAR FILL / X-OVER / T.CORR / PHASE / G-EQ / P-EQ / SPEAKER SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL / PCM MODE 5 Touch [RETURN] to return to the previous screen. Setting the Speakers Setting item : SPEAKER SELECT Set the connected speaker by touching the respective [ ] or [ ] button. FRONT1: FRONT2: REAR: CENTER: SUBW.: OFF/FULL (Full Range)/TW (Tweeter) OFF/ON OFF/ON OFF/ON OFF/MONO/STEREO • Set the speaker which is not connected to OFF. • Settings above can be carried out even when the speaker is set to OFF in "Speaker Setup" (page 54). • To use the subwoofer in MONO with PXA-H700 or PXA-H701 connected, connect the subwoofer to the subwoofer output terminal of PXA-H700 or PXA-H701. Set MX Mode of the External Audio Processor Before performing the operations below, set MX (Media Xpander) mode of the PXA-H700 to "AUTO" when the PXA-H700 is connected. Setting item : MEDIA XPANDER 1 Select ON or OFF of MX by touching [ ] or [ ] of MEDIA XPANDER. OFF: Turns off the MX effect of every music source. ON: Turns on the specified MX mode. 2 Touch [ ] after setting to ON. The Media Xpander setup screen appears. 3 Touch [ ] or [ ] of the desired MX mode. • Music source (such as radio broadcasts and CDs, excluding AM radio) level can be set. MX CD (OFF, CD MX 1 to 3) CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity. MX CMPM (OFF, CMPM MX 1 to 3) / MX SAT (OFF, SAT MX 1 to 3) This corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original. MX FM (OFF, FM MX 1 to 3) The medium to high frequencies become more clear, and produces well balanced sound in all the bands. MX DVD (OFF, MOVIE MX 1 to 2) The dialog portion of the video is reproduced more clearly. (DVD MUSIC) This disc contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately. MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX) Choose the MX mode (CMPM, MUSIC, or MOVIE) that corresponds to the media connected. • The contents of MX set here is reflected to PXA-H700 or PXA-H701. • When OFF is selected, MX effect of each MX mode will be OFF. • Each music source, such as radio, CD, and MP3 can have its own MX setting. • MX mode does not function when MX is ON for AM radio. • MX CMPM is applied for MP3/WMA/AAC and iPod. • MX SAT is applied for XM, SIRIUS, HD Radio. • The MX setting can be performed only when a source is currently selected. X-OVER Adjustment Setting item : X-OVER 1 Touch [ ] or [ ] of X-OVER to select L/R or L+R. L/R: L+R: Different adjustment values can be set for the left and right channels. Sets the same adjustment values for the left and right channels. 51-EN