Alpine IVA D106 Owner's Manual - Page 88

NORM EQ/DIV To Audio Input terminal Rear monitor (Sold Separately) To Video Input terminal Back-up camera (Sold Separately) To Video Output terminal To Video Output terminal TV Tuner or VCR (Sold Separately) To Audio Output terminal (White/Pink) M.CONT * Connect this to the touch panel-compatible rear monitor. M.CONT (White/Pink) (White/Brown) REMOTE OUT REMOTE IN (White/Brown) (White/Brown) REMOTE IN REMOTE OUT (White/Brown) (Orange/White) REVERSE Use only when back-up camera is connected. System Switch When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. When no device is connected, leave the switch in the NORM position. Change both switches to the left to set to the NORM position. Change both switches to the right to set to the EQ/DIV position. (If the front panel is viewed from the front.) • Do not make the two switches to different settings. • Be sure to turn the power off to the unit before changing the switch position. Video/Audio Output Connectors (AUX OUTPUT) Use when connecting an optional monitor etc. iPod (V)/CAMERA Connector Use when connecting a back-up camera. Audio Input Connectors (AUX/CAMERA IN) Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor. Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. Remote Control Input Lead (White/Brown) Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp. This lamp illuminates when the transmission is shifted into reverse (R). With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R). RCA Extension Cable (Sold Separately) 86-EN